Senix Ultrasonic level sensors accurately measure diesel fuel for rail applications

February 3, 2022  350  350   

According to the latest available data from the U.S. Bureau of Transportation Statistics (BTS), at the end of 2018 just over 26,000 freight locomotives were in operation in the U.S., and 431 passenger rail locomotives. Except for a few passenger rail lines that are electrified, the remainder of passenger rail and all of the freight rail in the U.S. is diesel-powered.

U.S. freight railroads can, on average, move one ton of freight more than 470 miles per gallon of diesel fuel, thanks to the low rolling resistance of steel wheels coupled together with the energy efficiency of the diesel locomotive.  According to the Association of American Railroads, the nation’s 64 freight railroads transit a network of nearly 137,000 freight rail miles. In 2018, U.S. Class I railroads moved 1.5 million carloads of food products, 1.5 million carloads of grain and other farm products, 1.2 million carloads of lumber and paper products, 2.4 million carloads of chemicals, and 1.8 million carloads of motor vehicles and parts.

Established in 2005, TMV Control Systems Inc. was formed from a vision to design and manufacture the next generation of locomotive control systems. Basing the platform on 22 years of experience in designing locomotive control systems, Mr Derick Vander Klippe’s pursuit was to offer the rail industry an advanced, robust control system with long-term performance.

The result was the Traction Engine Control Unit (TECU), an intuitive system that is easy to navigate and operate to get the most out of a vehicle. Installed inside the high voltage Electrical Cabinet, the TECU I/O modules receive input from contactors, relays, Current Sensors, Fuel Level Monitor, Pressure Sensors, Oil Sensors, and Senix ToughSonic CHEM ultrasonic level sensors. The TECU also receives Control Stand operations such as throttle direction, notch, brake, and many other locomotive operations. This data is viewable on a display screen located nearby, so you can see exactly what your vehicle is doing, from the inside out.

TMV uses the Senix Ultrasonic CHEM 10 Level Sensor to detect fuel levels in diesel-electric locomotive fuel tanks.  TMV Control had the expertise to calculate fuel level based on the dimensions of the fuel tank, but we needed something that could accurately measure the level or height of fuel.

TMV Control explored options such as using flow rate to measure fuel level, but experienced difficulties serious and tough conditions of the railroad such as trouble under movement, vibration, alternating weather and temperature conditions, and inclines. The Senix ultrasonic sensor can endure all those and still give accurate readings.  TMV Controls has selected the ToughSonic CHEM 10 due to its accuracy, ruggedness, dependability.  The CHEM 10 is made of PVDV, the transducer is protected by a layer of PVDF, the PUR jacketed cable and electronics are potted and protected, and all ToughSonic sensors have an IP68 rating.

Flow Rates are notoriously inaccurate because fuel is pumped out of the tank, but a return line pumps some back in. The incoming and outgoing fuels tend to be at different temperatures so flow rate sensors can measure more fuel going back in the tank.  Even small errors keep adding up. Calculating the dimensions of the tank with the readings from the Senix ToughSonic CHEM 10 ultrasonic sensor is much more accurate.  Senix measures, records, and displays fuel levels using the Senix sensor. Senix also measures kilowa@ hours. Using these two measurements, railroads can determine the efficiency of locomotives and their engines.