SENIX TOUGHSONIC CHEM 10
SENIX TOUGHSONIC CHEM 10
Sku: SEN-TOUGHSONIC-CHEM10
For applications where corrosive liquids or gasses are present. Maximum Range 10 feet (3 Meters)
Product Information
The ToughSonic CHEM 10 is a chemically resistant ultrasonic sensor designed for applications where corrosive liquids or gasses are present, but it is an excellent choice for benign environments as well. With a maximum range of 10 feet (3 meters), it is the smallest sensor in the ToughSonic CHEM sensor family. The ToughSonic CHEM 10 is sealed in a PVDF (Kynar®) housing. It is fully submersible, chemical resistant and shock resistant. It has a permanently attached, potted-in-place 9-wire cable that allows up to six simultaneous serial, analog and/or switch outputs. It is fully configurable with SenixVIEW configuration and analysis software.
Chem series sensors and SenixVIEW software put the power of ultrasonics in your hands. You can quickly adjust, optimize, save and clone your applications quickly without calibration! These sensors are housed in a rugged, chemically inert PVDF sealed housing for long life. They mount above the material surface and measure distance downward without contact. Outputs respond to that measured distance. Applications include pump control, bulk inventory, batch processing, water management and high/low level alarms.
Features
- Non-contact level measurement
- Rugged construction, IP68 rated
- Indoor or outdoor uses
- Top and bottom mounting threads
- Five outputs plus serial data
- Serial data-only models
- Temperature compensation
- PC configurable
Applications
- Chemical tank levels
- Benign liquid tank levels
- Tanks up to 10-ft (3 m) tall
- 1-1/2 inch NPT or BSP tank fittings
Specifications
| Maximum Range | 10 feet (3 meters) |
| Optimum Range | 4 to 80 inches (100 mm to 2 meters) |
| Temperature | -40° to 158° F (-40° to 70° C) |
| Humidity | 0 to 100% operating |
| Protection | NEMA-4X, NEMA 6P, IP68 |
| Transducer | Chemically isolated piezoelectric |
| Compensation | Temperature compensated SenixVIEW selected options |
| Resolution | Serial data: 0.0034 in. (0.086 mm) Analog steps: 4099 (0-10 VDC), 3279 (4-20 mA) |
| Repeatability | Nominal 0.2% of range @ constant temp. Affected by target, distance, environment |
| Update Rate | 20 Hz (50 ms), SenixVIEW adjustable; affected by SenixVIEW filter selections |
Output
| 0-10, 0-5 VDC or SenixVIEW customized Maximum output current 10 mA |
|
| Current Loops (x 2) |
Two 4-20 mA current loops: Current sourcing and current sinking Max loop resistance 450 ohms each SenixVIEW customized Both share calibration parameters |
| Switches (x 2) |
Two switches, SenixVIEW customized 150 mA max @ 40 VDC max SenixVIEW selected as sinking (NPN) or sourcing (PNP) Adjustable setpoint, polarity, hysteresis, ON timing, OFF timing |
| Serial Data Interface | Modbus & streaming protocols 9600-115200 baud (configurable) 8 data bits, 1 stop, no parity RS-485 permits multi-sensor networks Part number determines interface |
Mechanical
| Housing | Injection moulded, chemically resistant Polyvinylidene fluoride (PVDF) Also known as Kynar, a registered tradename of Arkema Inc. |
| Mounting | Top mount: 1-inch NPT (options available) Bottom: 1-1/2 in.straight, fits NPT or BSP Bottom nut UA-NUT15-PV (order separately) |
| Cable | Potted into sensor, pigtail termination 6.5 feet (2 meters), PUR jacketed Custom lengths available Standard models: 9-wire shielded + drain Serial data-only models: 4-wire + drain, dual twisted shielded pair |
| Weight | 21.2 oz. (0.60 kg) Weight includes 6.5 ft (2 meter) cable |
For more information, click here!
Manual
Data Sheet
Arkema Kynar Chemical Resistance Chart
3D Models