The RLC is a low profile, high performance stainless steel ring torsion type load cell. The fully welded constuction and glass-to-metal cableentry ensure that this product can be used successfully in harsh environments found in the food, chemical and allied process industries. This product is suitable for small and medium platform scales, hoppers and process weighing. This product meets the stringent Weights and Measures requirements throughout Europe and USA
The Model 363 is a multi-purpose nickel-plated S-Type load cell that can be used in tension or compression.
This product is suitable for a wide range of hybrid scales, overhead track scales, belt scales, and process weighing applications.
Reliable sealing is ensured by the proprietary TRANSEAL potting compound and additional mechanical protection of the strain gage area.
The SHB is a fully weld-sealed stainless steel bending beam type load cell. This product is suitable for low capacity platform scales,packaging machines, hybrid scales and process weighing. Fully welded construction and water block cable-entry ensure that this product can be used successfully in harsh environments found in the food, chemical and allied industries. This product meets the stringent Weights and Measures requirements throughout Europe.
The Model SSB is a stainless steel single-ended shear beam type load cell.
This robust product is suitable for a wide range of platform scales, pallet scales, overhead track scales, and process weighing applications.
The fully welded construction and water block cable entry ensure that this product can be used successfully in demanding environments found in the food, chemical, and allied process industries.
This product meets the stringent Weights and Measures requirements throughout Europe and the USA.
The Model 178 extensometer is a load sensor designed for force measurement on any load-bearing structure. This extensometer provides the total solution for weighing, level control, stress and fatigue monitoring. The design also allows multiple sensors to be permanently mounted for more complex stress profiling and analysis.
The Model 178 extensometer provides an ideal solution for non-intrusive level measurements for materials that are subject to uneven buildup, bridging, or sidewall collection. Also, liquids or wetted materials that are not suited for direct contact level measurement are an ideal application for the Model 178 extensometer.
The design of the Model 178 makes it an excellent solution for retrofitting existing structures without compromise of the integrity of the vessel or structure.
The KOBOLD URK model flowmeter/monitor works on the basis of the suspended float principle. It is sued for measuring the flow rate in closed line systems. The medium fl;ows from below throigh a glass measuring cone that gets wider on top. Thhus, the float is raised and indicates the respectie flow rate on the scale provided on the measuring cone.
The MSK320R contains two sensor elements and two signal conditioners, therefore providing two independent output signals A1. A2. B1 and B2 as well as the associated inverted signals /A1. /A2 /B1 and /B2. Combined with a safe input card, the sensor can be used in the overall system up to Performance Level PLd.
Profile MSK210: Max. resolution 25 μm max. resolution 0.045° with MR200 or MBR200 (100 poles) Repeat accuracy ±0.025 mm Repeat accuracy of ±1 increment Works with magnetic tape MB200/1 Works with MR200 magnetic ring, MBR200 magnetic tape ring Reading distance ≤1 mm Reading distance ≤0.8 mm Max. 4600 pulses/revolution with MBR200 (230 poles)
Profile MSK200/1: Max. resolution 0.4 μm Works with MB200/1 magnetic tape, MR200 magnetic ring, MBR200 magnetic tape ring Reading distance ≤1 mm IP67 protection category Optionally with reference point R or flexible reference marks FR Interface LD Interface RS485 with Panasonic or Yaskawa protocol
Profile LE200: Robust metal housing Status LED display sin/cos output 1 VSS Signal period 2000 μm Scale MB200/1 Insensitive to dust, shavings, humidity, etc.
The MSAC501 magnetic sensor serves truly absolute roto measurement, e.g., on large 3-phase current or torque motors.The sensor has the standardized SSI or 485 interfaces. Optionally, an LD output can be selected for incremental signal output. Circumferential speeds of 25 m/sec (incremental) or 5 m/sec (absolute) can be attained.
A combination of the MSAC506 magnetic sensor and the MRAC506 magnetic ring forms a system for absolute angle measurement. The MSAC506 sensor has an SSI interface with a resolution of 12 … 16 bit. There is also an analogue output (1 VSS) with 64 periods for dynamic position tracking. The sensor has an LED for distance monitoring
Profile MSK400/1: Max. resolution 1 mm Repeat accuracy of ±1 increment Works with magnetic tape MB400 Reading distance ≤4 mm
Profile MSK2000: Linear resolution 0.25 mm Repeat accuracy of ±1 increment Operating voltage 5 or 24 V Works with magnetic tape MB2000 Reading distance ≤10 mm
Profile MSK4000: Max. resolution of 0.25 mm Repeat accuracy ±2 increments (max. ±0.5 mm) Works with magnetic tape MB4000 Reading distance ≤20 mm
Very robust wire-actuated encoder in compact design for numerous areas of application including crane construction, stage construction, warehousing technology, etc., up to a measuring length of 6000 mm, with signal output in redundant design.
LR-Cal LPP 60-T Description Pressure comparator LR-Cal LPP 60-T in use with reference pressure gauge LR-Cal TLDMM 2.0The pressure test pump LR-Cal LPP 60-T is used to generate pressures and vacuum for checking, adjusting and calibrating mechanical and electronic pressure measuring instruments by comparative measurements. These pressure tests may be carried out in laboratories, workshop or on site at the measuring point. If the instrument under test and a sufficiently accurate reference measuring instrument (e.g. electronic pressure calibrator LR-Cal LPC 300 or LR-Cal LPC 200, accuracy ±0.025% FS) are connected to the LR-Cal LPP 60-T, the same pressure pressure resp. vacuum is applied to the two instruments when the pump is operated. Despite its compact dimensions, the pneumatic pressure comparator LR-Cal LPP 60-T is easy to operate and allows for exact generation of the required test pressures. A change-over switch enables the generation of vacuum as well. The LR-Cal LPP 60-T is fitted with a fine adjustment valve for the precise adjustment of pressures. The reference instrument is screwed directly on to the top of the pump and the unit under test is connected by means of a connection tube incorporating an adapter 1/4" BSP rotating female (optional 1/4" NPT female) port.
Proven primary pressure standard Deadweight Tester / Pressure Balances are the most accurate instrument available on the market for the calibration of electronic or mechanical pressure measuring instruments. The direct measurement of the pressure (p = F / A), as well as the use of high-quality materials enable a very small measurement uncertainty, in conjunction with an excellent long-term stability of 5 years (recommended in accordance with German Calibration Service DAkkS). The deadweight tester / pressure balance has therefore been used for years in factory and calibration laboratories in national institutes, research laboratories and in industry. Stand-alone operation Due to its integrated pressure generation and the pure mechanical measuring principle, the model LR-Cal LDW-P is ideal for on-site use for maintenance and service. Basic principle Pressure is defined as the quotient of force and area. The core component of the model LR-Cal LDW-P is therefore a very pecisely manufatured piston-cylinder-system, which is loaded with masses in order to generate the individual test points. The masses applied are proportional to the target pressure and this is achieved through optimally graduated weights. As standard, these masses are manufactured to the standard gravity (9.80665 m/s²), though the can be manufactured to a specific location (gravity) and also DAkkS-calibrated. Easy operation Depending on the instrument version the pressure is set via an integrated pump or via an external pressure supply by the use of control valves. For fine adjustment a very precisely adjustable spindle pump with a precision spindle running only within the pump body is mounted. As soon as the measuring system reaches equilibrium, there is a balance of forces between the pressure and the mass load applied. The excellent quality of the system ensures that this pressure remains stable over several minutes, so that the pressure value for comparative measurements can be read without any problems, or also so that more complex adjustments can be carried out on the item under test.
Universally usable wire-actuated encoder with measuring lengths of max. 15000 mm, robust design as well as precise and safe wire guidance; prepared for the attachment of various types of rotary encoders with 58 mm standard flange. In combination with a safety encoder from the PURE.MOBILE sensor platform, the wire-actuated encoder can also be used in safety-critical applications up to Performance Level PLd. Furthermore, the wire-actuated encoder can also be used in safety-critical applications up to Performance Level Pld for easy parameterization.
The fluid flows from bottom to top through the meter tube of the flowmeter. The float is lifted until an annular gap between the measuring cone and the float is produced which corresponds to the flow. The forces acting on the float are in equilibrium. The height of the float resulting from the flow rate is transmitted by the permanent magnet in the float through the magnetic tracking system in a rotation to the pointer axis of the analog indicator unit. The variable-area flowmeter consists of a stainless steel device with an integrated conical stainless steel measuring tube and a vertically movable float. The valve for setting the flow rate is built-in (only KDS-K/C).
The electronic units ZOE are specifically designed for the calculation and display of flow rates and volume of flowmeters. The device operates via battery or external power supply. The ZOE can be connected with flowmeters with pulse or frequency output. The electronic shows flow rate, daily counter (resettable) and total counter. Mass units can be set. All customised programme settings remain saved even after a battery exchange. The housing of ZOE is weather resistant and has protection category IP 66/67 (Nema 4X). The electronics is housed in a UV-resistant, glass-fibre reinforced nylon housing with stainless steel screws and FPM seals. The instruments are suitable for harsh indoor or outdoor environments and comply with EU Directive 2004/108/EC (Electromagnetic Compatibility).
The pressure transmitters of the 7LC series use the chip-in-oil developed by KELLER, uniting a pressure measuring cell, digital temperature compensation and signal processing in a compact housing made of stainless steel or Hastelloy. The transmitters are extremely resistant to environmental influences and deliver compensated measurement results as an analog, ratiometric 0,5...4,5V output signal over a wide temperature range.