The ToughSonic CHEM 20 is an ultrasonic sensor designed for measurement applications involving corrosive chemical liquids or gasses, but it is an excellent choice for benign materials as well. With a maximum range of 20 feet (6.1 meters), it is the mid-range option within the ToughSonic CHEM sensor family. The sensor is sealed in a PVDF (Kynar®) housing. It’s fully submersible, chemical resistant and shock resistant. The ToughSonic CHEM 20 has a permanently attached, potted-in-place 9-wire cable that allows up to six simultaneous serial, analog and/or switch outputs. It’s fully configurable with SenixVIEW configuration and analysis software. CHEM series sensors and SenixVIEW software put the power of ultrasonics in your hands. You can quickly adjust, optimize, save and clone your applications quickly without calibration! These sensors are housed in a rugged, chemically inert PVDF sealed housing for long life. They mount above the material surface and measure distance downward without contact. Outputs respond to that measured distance. Applications include pump control, bulk inventory, batch processing, water management and high/low level alarms.
The ToughSonic CHEM 35 ultrasonic sensor is designed for distance measurement applications where corrosive chemical liquids or gasses are present, but it is an excellent sensor for benign environments as well. With a maximum range of 35 feet (10.7 meters), it is the longest range member of the ToughSonic CHEM sensor family. The sensor is sealed in a PVDF (Kynar®) housing. It’s fully submersible, chemical resistant and shock resistant. The ToughSonic CHEM 35 has a permanently attached, potted-in-place 9-wire cable that allows up to six simultaneous serial, analog and/or switch outputs. It’s fully configurable with SenixVIEW configuration and analysis software. CHEM series sensors and SenixVIEW software put the power of ultrasonics in your hands. You can quickly adjust, optimize, save and clone your applications quickly without calibration! These sensors are housed in a rugged, chemically inert PVDF sealed housing for long life. They mount above the material surface and measure distance downward without contact. Outputs respond to that measured distance. Applications include pump control, bulk inventory, batch processing, water management and high/low level alarms.
Setpoint display with communication interface visualizes instructions for the operator during product change or format changes. Readability is optimized for intuitive user prompting: The red/green LEDs indicate whether a format part change is required. With the help of the backlit display, designations or setpoint and actual value can be clearly displayed. The operator confirms the changeover using an acknowledgment button. This means that faulty machine settings with the setpoint display AP10T can be avoided in the future, making flexible production machines more process-reliable.
The AAP20 position indicator with Industrial Ethernet interface intuitively guides the operator to the correct machine setting when changing products or changing formats. The backlit display shows setpoint and actual values precisely. Two LEDs clearly show the machine operator the direction in which the adjustment must be made. With the AP20 position display, faulty machine settings can thus be avoided in the future, making flexible production machines completely process-reliable.
The DE04 is a freely programmable and battery-powered position indicator. The position indicator DE04 provides maximum flexibility, since the always same basic device can be parameterized to the desired spindle pitch, display accuracy and reading position in an application-specific manner. Parameterization is conveniently performed via programming software via an external interface.
The DE10 is a freely programmable and battery-powered position indicator. The position indicator DE04 provides maximum flexibility, since the always same basic device can be parameterized to the desired spindle pitch, display accuracy and reading position in an application-specific manner. Parameterization is conveniently performed via programming software via an external interface.
The DE10P position indicator is a freely programmable and battery-powered position indicator. The DE10P position indicator provides maximum flexibility, since the always same basic device can be parameterized to the desired spindle pitch, display accuracy and reading position in an application-specific manner. The parameterization is performed directly on the device using operating keys.
Absolute position display with communication interface for linear or slide adjustment intuitively guides the operator to the correct machine setting when changing products or changing formats. Readability is optimized for intuitive user prompting: The backlit display clearly shows the setpoint and actual value, and the two LEDs clearly indicate the direction in which the adjustment must be mad.
The turbine flowmeter model DOT consists of a helically shaped turbine rotor supported in two tungsten carbide bearings, the rotor being solid ferritic stainless steel of a grade compatible with the metered liquid, all contained within a housing of non-magnetic stainless steel. A pick off coil having a permanent magnet core is mounted in the housing adjacent to the rotor blade tips such that a magnetic circuit is set up via the rotor blades. Rotation of the rotor varies the reluctance of this magnetic circuit and the flux changes induce a small voltage in the coil, the frequency of which is directly proportional to the rotor speed and therefore proportional to the volumetric flow rate. The effects of increasing viscosity reduce the linear flow range and shifts the k-factor. Further, the effect of viscosity depends on the frequency (RPM of rotors). Therefore, smaller the meter, higher is the effect of viscosity on the linearity curve.
The MSC500 magnetic sensor has a large, multi-color status LED that makes commissioning and function monitoring easier for users. The correct distance between the gage and the sensor can be visually monitored. With the plug connection directly on the sensor head, the MSC500 is also suitable for use in very confined spaces. As a result installation is fast and simple, which naturally means lower costs. In addition, the MSC500 sensor includes all digital square wave signals. This enables evaluation of the A/B signals, the inverted signals and the periodic index signals with the same sensor.
The compact pressure transmitters of the 21Zio series can be used both as a pressure measuring instrument and as a pressure switch. Thanks to the universal IO-Link interface according to IEC 61131-9, the sensor is flexible and easily and quickly integrable into intelligent automation and other systems. The switching functions and other parameters can be called up and configured directly via IO-Link. In this way, machine downtimes are reduced to a minimum and personnel are relieved.
The infrared laser thermometer optris CTlaser F2 offers a special measuring wavelength for temperature measurement of CO2 flame gases. This makes it optimally suited for e.g. combustion processes, garbage incineration, or processes in chemical reactors.
The IR thermometer’s temperature range covers temperatures from 200°C up to 1,650°C, while the stainless steel measuring head is heat-resistant up to 85°C without additional cooling. Optional cooling and protection equipment is available, ensuring exact temperature measurement even in rough surroundings.
The infrared thermometer optris CTlaser F6 is an upgraded version of the pyrometer optris CTlaser F2. It has also been designed for temperature measurement of CO flame gasses, e.g. in combustion processes, in garbage incineration, or in processes in chemical reactors.
The pyrometer measures temperatures precisely between 200°C and 1,650°C. Due to the measuring head being made of stainless steel, it is heat-resistant up to 85°C without additional cooling. Also, optional cooling and protection equipment is available, ensuring exact temperature measurement even in rough surroundings.
The infrared thermometer optris CTlaser G5 has been specifically designed for measurement of glass temperatures, especially for container glass, lightbulb production, vehicle glass production as well as in the manufacturing of solar cells. Last but not least, the IR thermometer optris CTlaser G5 allows for temperature measurement of smallest objects of 1 mm from a distance of 70 mm.
The IR thermometer optris CSlaser G5 HF offers very quick response times and is thus perfectly suited for fast processes.
The infrared thermometer optris CTlaser G7 is perfectly suited for precise temperature measurement of ultra-thin glass surfaces. It offers a broad temperature range from 100 °C up to 1200 °C and can be employed in temperatures of up to 85°C without additional cooling.
The IR thermometer for measurements of plastic foils and glass temperatures is capable of targeting smallest objects of 1.6 mm (0.06 in) in a distance of 70 mm (2.76 in). Its standardized two-wire interface additionally allows for a reliable transfer of measurement data and easy integration into a PLC.
The infrared video thermometer optris CSvideo 3M is perfectly suited for low-temperature measurement of metals and composite materials starting from 50 °C. Parallel use of the video module and the laser sight allow for an easy and exact measuring field marking even if the measuring object is located in hard-to-access areas.
The new Optris video pyrometers CTvideo 1M / 2M allow a parallel use of video and crosshair laser aiming for an optimal measuring field adjustment even in processes with limited access. It reliably measures temperatures of metals or ceramics and, due to its short measuring wavelength, reduces measuring errors of surfaces with low or unknown emissivity.
The infrared video thermometer optris CTvideo 3M is perfectly suited for low-temperature measurement of metals and composite materials starting from 50°C. Parallel use of the video module and the laser sight allow for an easy and exact measuring field marking even if the measuring object is located in hard-to-access areas
Due to its short measuring wavelength the ratio pyrometer optris CTratio 1M is especially suited for measurement of extremely high metal temperatures and the very short response time allows for surveillance of very fast processes.
The ratio pyrometer is largely resistant against dust, steam and dirty observation windows. This allows for an accurate measurement in cases of window soiling of up to 90 percent. The pyrometer additionally measures reliably in cases where the measuring object only covers 5 percent of the measuring point or moves very fast.
Rugged, electrically isolated sensing head and fiber optic cable for ambient temperatures up to 315 °C without cooling.
Due to its short measuring wavelength the ratio pyrometer optris CTratio 2M is especially suited for measurement of extremely high metal temperatures and its very short response time allows for surveillance of very fast processes.
Rugged, electrically isolated sensing head and fiber optic cable for ambient temperatures up to 315 °C without cooling