Comtest
{{image.AltTag}} {{image.AltTag}}
Default Image Default Image

{{details.product.ModelName}}

Sku: {{details.product.ModelNumber}}

Positioning drive AG25 Fieldbus/IE Industrial Ethernet
{{details.product.PriceUnits}}
Please fill out this field...
Please enter a number...
Please enter at least 1...
Please enter at max 999999...
You purchased this item on {{details.product.OrderHistory[0].OrderDate | date : 'yyyy-MM-dd'}}

Thanks to special power and control electronics, absolute sensor technology and integrated position controller, the AG25 ultra-compact and powerful actuator is particularly well suited for format adjustments optimized for setup times. Due to the variety of available interface standards, quick and smooth integration into the existing controller is possible.

  • Small dimensions, high power density
  • easy mounting and commissioning
  • High flexibility, high protection category
  • stainless steel 14 mm diam. hollow shaft, robust housing
  • Brushless EC motor with a long service life
  • solid absolute sensor, magnetic sensing technology
  • integrated power and control electronics
  • Integrated Industrial-Ethernet-Fieldbus
  • Integrated positioning controller
  • M12 component mounting technology
  • Industry 4.0 ready

Mechanical data

Feature Technical data Additional information
Shaft stainless steel  
Housing

glass-fiber reinforced plastic / zinc die-cast

  
Clamping ring stainless steel  
Torque pin stainless steel

form A
  stainless steel form B
Nominal torque/rated speed 5 Nm at 50 rpm ±10 % i = 98
  3 Nm at 75 rpm ±10 % i = 66
Operating mode

intermittent duty S3: 25% DC, 10 min.

 EN 60034-1
Weight ~0.8 kg  

Electrical data

Feature Technical data Additional information
Operating voltage 24 V DC ±10 %

reverse polarity protected, output stage
  24 V DC ±10 %

reverse polarity protected, control
Current consumption 2.2 A ±10 %

at nominal torque/speed (output stage)
  <150 mA

starting current >150 mA (control)
Power input ≤58 W output stage
  ≤3.6 W control
Battery

CR2477N, 3 V lithium, 950 mAh

  
Battery service life ~5 year(s)

depending on ambient conditions
Parameter storage 106 cycles also applies to calibration operations
Digital inputs 17 … 30 V DC

typically 10 mA
Status display 8 LEDs  
Keys

2 internal keys, internal DIP switch

  
Switching outputs 24 V DC ±10 % ≤40 mA
Bus connection

EIP-EtherNet/IP

  
  EPN-PROFINET  
  ECT-EtherCAT  
  EPL-POWERLINK  
Type of connection

2x M12 plug connectors (A-coded)

4-pole, 1x pin; 8-pole, 1x pin
 

2x M12 plug connectors (D-coded)

4-pole, 2x socket
 

grounding via flat connector 6.3 mm

  

System data

Feature Technical data Additional information
Resolution 720 steps/revolution

shaft

  
Repeat accuracy ±1 steps/revolution  
Travel range ±1300 revolution(s) i = 98
  ±1980 revolution(s) i = 66

Ambient conditions

Feature Technical data Additional information
Ambient temperature 0 … 45 °C  
Storage temperature -20 … 60 °C  
Relative humidity   condensation inadmissible
EMC

EN 61800-3, second environment

 interference resistance / immission
 

EN 61800-3, C2

emitted interference / emission
Protection category IP54, IP65

EN 60529, only with mating connector
Shock resistance 500 m/s2, 11 ms EN 60068-2-27
Vibration resistance ≤100 m/s2, 5 … 150 Hz EN 60068-2-6

Ordering table

Feature Order data Specifications Additional information
Gear ratio

A66

 i = 66  

98

 i = 98  
 
Protection category

BIP54

 IP54  

IP65

 IP65  
 
Shaft design/diameter

CKR/14

 clamping ring, ø14 mm  

N/10

 keyway, ø10 mm  
 
Torque pin

DA

 bolt, ø6 mm  

B

 bolt, ø10 mm Aluminum
 
Interface/protocol

EECT

 EtherCAT  

EIP

 EtherNet/IP  

EPL

 POWERLINK  

EPN

 PROFINET  
 

Ordering key

AG25 Fieldbus/IE-A-50W-B-C-D-ABM-E-SW