OverviewApplicationsMore information The operation of the model KAL-... electronic flow monitor is based on the calorimetric principle. The end face of the sensor is heated to a few degrees above the temperature of the flow medium. When the medium flows, the heat generated in the sensoris transferred to the medium, ie, the sensor is cooled. The cooling procedure is an accurate measure of the flow velocity. The sensor signal is compared with the reference data stored in microcontroller. An alarm signal and/or an analogue signal (4-20mA) that is proportional to the flow velocity is output if the actual flow velocity deviates from the desired flow velocity. The microcontroller allows the flow indicator to be easily claibrated and the temperature to be compeansted.
Switching range: 4 cm/s ... 2 m/s Connection: G ¼ ... G ¾, ¼ ... ¾" NPT, M12 x 1, Tri-Clamp® Material: stainless steel pmax: 100 bar tmax: 80°C Repeatability: approx. 2 % LED-chain, contacts, analogue output