The WH3650M rotary encoder is an absolute magnetic single- and multi-turn rotary encoder, which impresses with its extremely compact design. It is particularly robust and resistant to vibrations. Thanks to its high degree of protection up to IP67 and a temperature range of -40° C … +85° C, it is also suitable for demanding industrial applications. The particularly small design with a diameter of only 36 mm predestines the rotary encoder for use in applications with limited installation space. Thanks to the IO-Link and SSI interfaces, it is ready for Industry 4.0 and ideally suited for point-to-point communication in automation networks.
The AV3650M rotary encoder is an absolute magnetic single- and multi-turn rotary encoder, which impresses with its extremely compact design. It is particularly robust and resistant to vibrations. Thanks to its high protection class up to IP67 and a temperature range of -40° C … +85° C, it is also suitable for demanding industrial applications. The particularly small design with a diameter of only 36 mm predestines the rotary encoder for use in applications with limited installation space. The analog current or voltage outputs can be adjusted to any measuring range thanks to the teach-in.
Proven primary pressure standard Deadweight Tester / Pressure Balances are the most accurate instrument available on the market for the calibration of electronic or mechanical pressure measuring instruments. The direct measurement of the pressure (p = F / A), as well as the use of high-quality materials enable a very small measurement uncertainty, in conjunction with an excellent long-term stability of 5 years (recommended in accordance with German Calibration Service DKD/DAkkS). The deadweight tester / pressure balance has therefore been used for years in factory and calibration laboratories in national institutes, research laboratories and in industry.
Stand-alone operation Due to its integrated pressure generation and the pure mechanical measuring principle, the model LR-Cal CPB5000-HP is ideal for on-site use for maintenance and service.
Basic principle Pressure is defined as the quotient of force and area. The core component of the model LR-Cal CPB5000-HP is therefore a very pecisely manufatured piston-cylinder-system, which is loaded with masses in order to generate the individual test points. The masses applied are proportional to the target pressure and this is achieved through optimally graduated weights. As standard, these masses are manufactured to the standard gravity (9.80665 m/s²), though the can be manufactured to a specific location (gravity) and also DAkkS-calibrated.
Easy operation The setting of the pressure is made via an integrated pump. For fine adjustment, a very precisely controllable spindle pump is fitted, with a spindle running within it. As soon as the measuring system reaches equilibrium, there is a balance of forces between the pressure and the mass load applied. The excellent quality of the system ensures that this pressure remains stable over several minutes, so that the pressure value for comparative measurements can be read without any problems, or also so that more complex adjustments can be carried out on the test item.
Robust instrument design With the high-pressure model LR-Cal CPB5000-HP, calibrations up to a maximum pressure of 5,000 bar are possible. It is built into a stable base and offers exceptional ease-of-use. With the integrated priming pump and the 250 ml tank, large test volumes can also be easily filled and primed.
Stand-alone operation Due to its integrated pressure generation and the pure mechanical measuring principle, the model LR-Cal CPB5600-DP is ideal for on-site use for maintenance and service.
Basic principle Pressure is defined as the quotient of force and area. The core component of the model LR-Cal CPB5600-DP is therefore a very pecisely manufatured piston-cylinder-system, which is loaded with masses in order to generate the individual test points. The masses applied are proportional to the target pressure and this is achieved through optimally graduated weights. As standard, these masses are manufactured to the standard gravity (9.80665 m/s²), though the can be manufactured to a specific location (gravity) and also DAkkS-calibrated.
Easy operation The pressure setting depends on the instrument design and is either done via an integrated pump or from external pressure supply via a metering valve. For fine adjustment, a very precisely controllable spindle pump is fitted, with a precisions spindle running within it. As soon as the measuring system reaches equilibrium, there is a balance of forces between the pressure and the mass load applied. The excellent quality of the system ensures that this pressure remains stable over several minutes, so that the pressure value for comparative measurements can be read without any problems, or also so that more complex adjustments can be carried out on the test item.
The LR-Cal CPB5600-DP instrument bases are available in the following four designs:
The instruments include the components of two pressure balances in one housing. For the calibration of differential pressure gauges under a static pressure, the two systems are separated by a by-pass valve.
One of the systems is used to generate the static pressure, with the second system generating the differential pressure (incl. static pressure). It is recommended that one of the sets of trim-masses is used for this (see accessories).
The instrument bases, pneumatic to 100 bar and hydraulic to 1,000 bar are fitted with quick-release meachnism. This enables a quick and safe replacement of the piston-cylinder systems without any tools. The pneumatic instrument design with separator is fitted with a connection for the piston-cylinder systems with M30 x 2 female thread and the hydraulic high-pressure base version is fitted with a M30x2 female thread with sealing cone.
Very robust wire-actuated encoder in compact design for numerous applications including crane construction, stage construction, warehousing technology, etc., with a measuring length up to 3000 mm. Easy, universally changeable installation. In combination with a safety encoder from the PURE.MOBILE sensor platform, the wire-actuated encoder can also be used in safety-critical applications up to Performance Level PLd. Furthermore, the wire-actuated encoder can also be used in safety-critical applications up to Performance Level Pld for easy parameterization.
These rugged, compact ultrasonic sensors inspired the “ToughSonic” name. They are Senix flagship products with heavy-duty electronics epoxy potted into type 316 stainless steel housings, with permanently attached cables and ruggedized piezoelectric transducers. ToughSonic sensors are found on remote monitoring stations from the Australian outback to Alaskan oil fields. They are installed on heavy construction and farm equipment and in some of the harshest factory environments. When an ordinary sensor just won’t do, you need a ToughSonic.
These rugged, compact ultrasonic sensors inspired the “ToughSonic” name. They are Senix's flagship products with heavy-duty electronics epoxy potted into type 316 stainless steel housings, with permanently attached cables and ruggedized piezoelectric transducers. ToughSonic sensors are found on remote monitoring stations from the Australian outback to Alaskan oil fields. They are installed on heavy construction and farm equipment and in some of the harshest factory environments. When an ordinary sensor just won’t do, you need a ToughSonic.
The AG02 actuator is suitable for practically all positioning tasks thanks to its high-power density and robust design. The hollow shaft enables quick and easy installation on the existing adjustment unit, and standardized interfaces ensure smooth integration into your control system.
Powerful actuator for the positioning of adjustment axes with high torque. Precise and error-free positioning is also possible in this performance class without additional external modules. The integrated hollow shaft enables simple mechanical integration into the existing machine concept
The AG05 actuator is the most compact in its class and ensures convenient handling with its integrated display and button operation. A quick and simple changeover from manual adjustment is possible via the hollow shaft.
The AG06 actuator is a compact and powerful actuator with high torque and is particularly suitable for automated positioning tasks. The integrated position controller with magnetic absolute sensor ensures precise positioning.
With a maximum nominal torque of 14 Nm, the new AG24 is a real power pack for format adjustment
Thanks to special power and control electronics, absolute sensor technology and integrated position controller, the AG25 ultra-compact and powerful actuator is particularly well suited for format adjustments optimized for setup times. Due to the variety of available interface standards, quick and smooth integration into the existing controller is possible.
The SZM type glass tube level indicator is applicable for the indication of liquid level in small and middle-sized, standing or lying round containers used in food, pharmaceutical and chemical industries. The loads occurring at the installation are absorbed by the outer armature, thus the glass tube is protected against breaking. The outer armature also protects the glass tube against the mechanical impacts that may occur following the installation. It is recommended that the normal design level indicators be fitted on vessels containing pure liquids, while the indicators mounted with cleaning stubs (a bottom, or bottom-top stub) be fitted on containers filled with contaminated liquid. Installation length means the distance between the horizontal centre lines of the two fl anges, that is minimum 370 mm, and maximum 3 080 mm. The glass tubes longer than 1 500 mm are welded. The bottom, and top sealing of the glass tube is by two O-rings each, the material of which is to be chosen to be chemically compatible with the liquid measured. Standard sealing material is FPM, whereas EPDM or NBR are available on request. The level indicator may be furnished with capacitive level sensors - max. 3 pieces over 100 mm - as requested (NAMUR design), which monitor the minimum and/or maximum level or any level along the scale. Anodised aluminium rule with indication of level or volume may be mounted optionally on side of the outer armature. The scale can be engraved on the aluminium rule or the glass tube, or can be printed on a foil and to be attached to the glass tube or aluminium rule.
The flow meter and switch for very low flows model KSV for liquids or air operates on the suspended float principle. The direction of flow is from bottom to top, and the installation position is vertical. The indication point is the upper edge of the ball. The device has been designed as a simple and thus economical measuring system. The optional needle valve allows economical control. The device has been designed for panel mounting.
The remote data transmission unit ARC1-Box with logger function is encased in a robust, water-tight aluminium housing. This unit records measurements made by external sensors (e.g. a level sensor) and periodically transmits the collected data via 2G, 3G, 4G or LoRaWAN. The high-performance battery and sophisticated power management enable autonomous operation for up to 10 years. KELLER provides a range of licence-free software solutions for configuration and data processing. The easiest and most convenient way to access the collected data is via Keller PressureSuit Cloud.
The remote data transmission unit ARC1-Box-SB with logger function is equipped with safety barriers and, in combination with intrinsically safe transmitters, it is suitable for use in hazardous applications. The unit is encased in a robust, water-tight aluminium housing. It records measurements made by external sensors (e.g. a level sensor) and periodically transmits the collected data via 2G, 3G, 4G or LoRaWAN. The high-performance battery and sophisticated power management enable autonomous operation for up to 10 years. KELLER provides a range of licence-free software solutions for configuration and data processing. The easiest and most convenient way to access the collected data is via Keller PressureSuit Cloud.
The remote data transmission unit ADT1-Tube is encased in a robust, stainless steel housing, which is ideally suited to installation in 2" monitoring pipes. The LoRa module, which can be configured on a country-specific basis, establishes a connection with the Internet and makes it possible to collect measurement data in a low-cost and energy-saving manner. These autonomous devices can be linked with digital level sensors and pressure transmitters in the KELLER D and X product lines. With three conventional, high-quality AA batteries, the system can operate autonomously for up to 5 years. The LoRaWAN provider can be selected freely or an in-house or open source infrastructure and associated services can be used. The easiest and most convenient way to access the collected data at the end of the transmission chain is via Keller PressureSuit.
The remote data transmission unit ADT1-Box is encased in a robust, water-tight plastic housing. The LoRa module, which can be configured on a country-specific basis, establishes a connection with the Internet and makes it possible to collect measurement data in a low-cost and energy-saving manner. These autonomous devices can be linked with digital level sensors and pressure transmitters in the KELLER D and X product lines. With three conventional, high-quality AA batteries, the system can operate autonomously for up to 5 years. The LoRaWAN provider can be selected freely or an in-house or open source infrastructure and associated services can be used. The easiest and most convenient way to access the collected data at the end of the transmission chain is via Keller PressureSuit.
The infrared thermometer optris CTlaser LT allows for exact temperature measurement on smallest objects from 0,9 mm at a distance of 70 mm. The IR thermometer optris CTlaser LTF is due to its short configuration time of only 9 ms perfectly suited for surveillance of quick working processes.
Both models offer a robust and premium-quality stainless steel measuring head with an innovative double laser sighting for an exact measuring field marking in every distance.
The infrared thermometer optris CTlaser MT offers a special measuring wavelength for precise temperature measurement through flames of 200°C to 1,650°C. It is thus perfectly suited for surveillance of work pieces in ovens, for measurements in chemical reactors and for testing of refractory linings in kilns.
The stainless steel measuring head with its highly precise double laser visor allows for exact marking of measurement spots in any distance at any time. The temperature of even the smallest objects with a size of only 1.6 mm can be easily measured with the IR thermometer.
The infrared thermometer optris CTlaser P7 is perfectly suited for precise temperature measurement of thin plastic materials, e.g. PET, PU, PTFE, PA or CTA and for determination of temperatures of glass surfaces. It offers a broad temperature range from 0°C up to 710°C and can be employed in temperatures of up to 85°C without additional cooling.
The IR thermometer for measurements of plastic foils and glass temperatures is capable of targeting smallest objects of 1.6 mm in a distance of 70 mm. Its standardized two-wire interface additionally allows for a reliable transfer of measurement data and easy integration into a PLC.