Potentiometer output Wire-actuated encoder with analog output, potentiometric, current source or voltage output, with a measuring length of up to 6000 mm. Easy adjustment of the output signal to the actual measuring length via an integrated gear mechanism.
Current/Voltage output Wire-actuated encoder with analog output, potentiometric, current source or voltage output, with a measuring length of up to 6000 mm. Easy adjustment of the output signal to the actual measuring length via an integrated gear mechanism.
Geared Potentiometers - heavy duty ratios 0.25 to 550:1 4-20 mA output with three CAM switches
Geared Potentiometers - heavy duty ratios 0.25 to 550:1 Potentiometer output
Geared Potentiometers - heavy duty ratios 0.25 to 550:1 4-20mA output
Geared Potentiometers - light duty ratios 0.25 to 550:1 Potentiometer output with three CAM switches, solid shaft
Hollow Shaft Encoder, dual channel The IG06 incremental encoder features a low-cost design with through hollow shaft and can be mounted easily.
The KOBOLD DMH flow meter is used to measure and monitor the volume flow rate of fluids, pulps, pastes and other electrically conductive materials, without loss of pressure. When an electrically conductive passes through a directional magnetic field, a voltage is induced in accordance with Faradays law of induction.
The fluid flows from bottom to top through the meter tube of the flow meter. The float is lifted until an annular gap between the meter ring and the cone-shaped float is produced which corresponds to the flow. The forces acting on the float are in equilibrium.
The new model DMW-... direct mass flow meter has been specially designed for use in gas measuring technology. An inexpensive analogue output is fitted. The model DMW is available in three versions: with or without integrated 3 ½-digit LCD display or with a 8-digit counter. The direct stream procedure is ideally suited for measurements from 0,5 Nl/min (max.) up to 6000 Nl/min air (model: DMW-B*786). In case of small flow rates the measurements are taken with a bypass-system (DMW-A/C). In contrast with most volumetric flow meters the mass flow meter DMW-... has no moving parts, and no temperature or pressure correction is required. The meter may be installed in any position and the pressure loss is negligible. The simple mechanical construction ensures the highest degree of reliability when used with aggressive gases, and under tough industrial service conditions.
Scale 86.8mm, reinforced plastic housing either dust-tight, oil filled or waterproof, scale and pointer, with additional digital counter
Accessories for DE04, DE10, DKE01