The spectral range of 500 to 540 nm of the newly developed thermal imager optris PI 05M decreases measurement errors resulting from unknown or changing emissivities. Due to the spectral range as well as the continous measurement range from 900 to 2450 °C, the compact infrared camera is perfectly suited for temperature measurements of molten metals.
The frame rate of 1 kHz as well as the high optical resolution enable an optimal adaption to the respective application.
The newly developed thermal camera optris PI 1M is especially suited for temperature measurements of metals, as these exhibit a distinctly higher emissivity at the short measurement wavelength of 1μm than at measurements in the previously conventional wavelength range of 8-14 μm.
In parallel with the visualization of a thermal process, the high-performance sensor electronics allow a short reaction time of 1ms for the displaying of the temperature information of the center pixel.
With the new glass inspection system, temperature differences during glass hardening processes can be quickly detected, thus avoiding rejects and providing automatic quality monitoring.
The Top Down GIS 640 R system with temperature referencing by means of a sensor from below as well as automatic emissivity correction for standard and low-E glasses was specially developed for process control in glass tempering machines.
The thermal imager optris PI 640i is the smallest measuring VGA infrared camera worldwide. With an optical resolution of 640x480 pixels, the PI 640i delivers pin-sharp radiometric pictures and videos in real time.
With a body sized 45x56x90 mm and weighing only 269 - 340 g (depending on lens), the optris PI 640i counts among the most compact thermal imaging cameras on the market.
It can be delivered with industrial thermal imager equipment and it comes with an extensive license-free thermography software package.
The infrared thermometer optris CTlaser P7 is perfectly suited for precise temperature measurement of thin plastic materials, e.g. PET, PU, PTFE, PA or CTA and for determination of temperatures of glass surfaces. It offers a broad temperature range from 0°C up to 710°C and can be employed in temperatures of up to 85°C without additional cooling.
The IR thermometer for measurements of plastic foils and glass temperatures is capable of targeting smallest objects of 1.6 mm in a distance of 70 mm. Its standardized two-wire interface additionally allows for a reliable transfer of measurement data and easy integration into a PLC.
The infrared thermometer optris CTlaser MT offers a special measuring wavelength for precise temperature measurement through flames of 200°C to 1,650°C. It is thus perfectly suited for surveillance of work pieces in ovens, for measurements in chemical reactors and for testing of refractory linings in kilns.
The stainless steel measuring head with its highly precise double laser visor allows for exact marking of measurement spots in any distance at any time. The temperature of even the smallest objects with a size of only 1.6 mm can be easily measured with the IR thermometer.
The infrared thermometer optris CTlaser LT allows for exact temperature measurement on smallest objects from 0,9 mm at a distance of 70 mm. The IR thermometer optris CTlaser LTF is due to its short configuration time of only 9 ms perfectly suited for surveillance of quick working processes.
Both models offer a robust and premium-quality stainless steel measuring head with an innovative double laser sighting for an exact measuring field marking in every distance.
The infrared thermometer optris CTlaser G7 is perfectly suited for precise temperature measurement of ultra-thin glass surfaces. It offers a broad temperature range from 100 °C up to 1200 °C and can be employed in temperatures of up to 85°C without additional cooling.
The IR thermometer for measurements of plastic foils and glass temperatures is capable of targeting smallest objects of 1.6 mm (0.06 in) in a distance of 70 mm (2.76 in). Its standardized two-wire interface additionally allows for a reliable transfer of measurement data and easy integration into a PLC.
The infrared thermometer optris CTlaser G5 has been specifically designed for measurement of glass temperatures, especially for container glass, lightbulb production, vehicle glass production as well as in the manufacturing of solar cells. Last but not least, the IR thermometer optris CTlaser G5 allows for temperature measurement of smallest objects of 1 mm from a distance of 70 mm.
The IR thermometer optris CSlaser G5 HF offers very quick response times and is thus perfectly suited for fast processes.
The infrared thermometer optris CTlaser F6 is an upgraded version of the pyrometer optris CTlaser F2. It has also been designed for temperature measurement of CO flame gasses, e.g. in combustion processes, in garbage incineration, or in processes in chemical reactors.
The pyrometer measures temperatures precisely between 200°C and 1,650°C. Due to the measuring head being made of stainless steel, it is heat-resistant up to 85°C without additional cooling. Also, optional cooling and protection equipment is available, ensuring exact temperature measurement even in rough surroundings.
The infrared laser thermometer optris CTlaser F2 offers a special measuring wavelength for temperature measurement of CO2 flame gases. This makes it optimally suited for e.g. combustion processes, garbage incineration, or processes in chemical reactors.
The IR thermometer’s temperature range covers temperatures from 200°C up to 1,650°C, while the stainless steel measuring head is heat-resistant up to 85°C without additional cooling. Optional cooling and protection equipment is available, ensuring exact temperature measurement even in rough surroundings.
The infrared thermometer optris CTlaser 05M has been specifically designed for temperature measurement of metal surfaces and molten metals. It features a very short measuring wavelength of 525 nm, minimizing measuring errors during emissivity changes. The thermometer offers a temperature range between 1,000°C and 2,000°C.
The measuring head can be installed even in high ambient temperatures and can be equipped with industrial accessories for IR thermometers, e.g. water cooling, if necessary.
The infrared thermometer optris CTlaser 4M with its wavelengths range of 2.2 – 6 μm is perfectly suited for measurements of metals, metal oxides, ceramics or materials with unknown or changing emissivity. It offers a temperature range between 0°C and 500°C and can be employed in up to 85°C without additional cooling.
Due to its ultra-fast exposure time of 90 μs, the highly efficient IR thermometer allows the surveillance of high speed processes and is the ideal pyrometer for low temperature applications. Selectable outputs and various digital interfaces offer a high variability for the evaluation of the measured data.
The infrared thermometer optris CTlaser 3M is perfectly suited for measurements of low metal temperatures and composite materials. It offers a temperature range between 50°C and 1,800°C and can be employed in up to 85°C without additional cooling.
Due to its extremely short response time of 1 ms, the highly efficient IR thermometer allows the surveillance of fast processes and measures reliably and precisely even on smallest measuring fields of up to 0.7 mm. Selectable outputs and various digital interfaces offer a high variability for the evaluation of the measured data.
The IR thermometer optris CTlaser 1M / 2M allows precise and quick measuring of high temperatures of metal surfaces. The short measuring wavelengths are not only capable of measuring metal temperatures but also allow for measurement of metal oxides and ceramics.
The robust premium stainless steel measuring head of the CTlaser pyrometer additionally offers exact marking of measuring spots in every distance due to its innovative double laser sight.
Due to its short measuring wavelength the ratio pyrometer optris CTratio 2M is especially suited for measurement of extremely high metal temperatures and its very short response time allows for surveillance of very fast processes.
The ratio pyrometer is largely resistant against dust, steam and dirty observation windows. This allows for an accurate measurement in cases of window soiling of up to 90 percent. The pyrometer additionally measures reliably in cases where the measuring object only covers 5 percent of the measuring point or moves very fast.
Rugged, electrically isolated sensing head and fiber optic cable for ambient temperatures up to 315 °C without cooling
Due to its short measuring wavelength the ratio pyrometer optris CTratio 1M is especially suited for measurement of extremely high metal temperatures and the very short response time allows for surveillance of very fast processes.
Rugged, electrically isolated sensing head and fiber optic cable for ambient temperatures up to 315 °C without cooling.
The infrared video thermometer optris CTvideo 3M is perfectly suited for low-temperature measurement of metals and composite materials starting from 50°C. Parallel use of the video module and the laser sight allow for an easy and exact measuring field marking even if the measuring object is located in hard-to-access areas
The new Optris video pyrometers CTvideo 1M / 2M allow a parallel use of video and crosshair laser aiming for an optimal measuring field adjustment even in processes with limited access. It reliably measures temperatures of metals or ceramics and, due to its short measuring wavelength, reduces measuring errors of surfaces with low or unknown emissivity.
The infrared video thermometer optris CSvideo 3M is perfectly suited for low-temperature measurement of metals and composite materials starting from 50 °C. Parallel use of the video module and the laser sight allow for an easy and exact measuring field marking even if the measuring object is located in hard-to-access areas.
The video pyrometer optris CSvideo 2M, with its integrated video sighting allows for an additional visor assistance. Combined with the innovative and patented crosshair laser, it offers a reliable and precise measuring field adjustment in hard-to-reach areas and in cases of measuring objects being so hot the laser visor is not visible anymore.
The infrared thermometer optris CSlaser G5 HF has been specifically designed for temperature measurement of flat glass, container glass, lightbulbs, vehicle glass, and solar cells.
Its standardized two-wire interface provides a reliable measuring data transmission and allows for an easy integration of the temperature sensors into a Siemens PLC. The IR thermometer is additionally equipped with an innovative double laser visor for a precise marking of the measuring spot. A variety of optics ensures high adaptability with diverse applications.
The infrared thermometer optris CSlaser 2M has been designed specifically for exact temperature measurement of metallic surfaces. Its short measuring wavelength allows not only for precise measurement of metal temperatures but metal oxides and ceramics as well.
The IR thermometer is equipped with an innovative double laser sight for precise marking of the measuring spot. A variety of scopes ensures high adaptability with various applications.
The infrared thermometer optris CSlaser hs LT allows for measuring of the slightest temperature differences from 0.025°C on, which plays an important role for e.g. continual surveillance of product homogeneities.
In addition, its double laser sight ensures an exact marking of measuring fields and a variety of scopes offers high adaptability with various applications.