The infrared thermometer optris CTlaser 4M with its wavelengths range of 2.2 – 6 μm is perfectly suited for measurements of metals, metal oxides, ceramics or materials with unknown or changing emissivity. It offers a temperature range between 0°C and 500°C and can be employed in up to 85°C without additional cooling.
Due to its ultra-fast exposure time of 90 μs, the highly efficient IR thermometer allows the surveillance of high speed processes and is the ideal pyrometer for low temperature applications. Selectable outputs and various digital interfaces offer a high variability for the evaluation of the measured data.
The infrared thermometer optris CTlaser 05M has been specifically designed for temperature measurement of metal surfaces and molten metals. It features a very short measuring wavelength of 525 nm, minimizing measuring errors during emissivity changes. The thermometer offers a temperature range between 1,000°C and 2,000°C.
The measuring head can be installed even in high ambient temperatures and can be equipped with industrial accessories for IR thermometers, e.g. water cooling, if necessary.
The SGR510/520 series torque sensors are suitable for torque measuring, testing, feedback control of drive mechanisms and process control applications.
The SGR series transducers use modern strain gauge signal conditioning techniques to provide a high bandwidth low-cost torque measuring solution with high over range and overload capabilities.
The AP10 position indicator with communication interface is used for monitored format adjustment to reduce setup times and increase machine efficiency. Readability is optimized for intuitive user prompting: The backlit display clearly shows the setpoint and actual value, and the two LEDs clearly indicate the direction in which the adjustment must be made. The IO link interface enables easy and reliable integration into modular machines
This ultrasonic level transmitter is intrinsically safe (IS) and CSA rated for Class I Division 1 hazardous areas in the US and Canada. It has a maximum range of 25 feet (7.62 meters) and is typically used for tank level measurement but can also be used for other hazardous area applications such as measuring the roll diameter on coating machinery. The transmitter sensing element is chemically resistant and the electrical connection is a two-wire loop-powered 4-20 mA output. The SafeSonic 25-L is pre-calibrated from 1 and 25 feet but can be user-calibrated to other ranges using optional accessories.
The level monitor model NSV has decisive advantages, especially with bulk goods with low bulk densitiy. Vibrations are induced in a stainless steel fork by a piezoelectric crystal. If the medium comes into contact with the vibrating fork, this vibration is damped.This damping is detected in a pluggable evaluation module and transformed into a potential-free limit contact. In addition to the standard version NSV-8200, the devices can also be provided for vertical installation with an extended neck pipe (NSV-8201). The maximum length of the neck pipe is 3000 mm. The plug-in evaluation module can be changed easily so that the devices are really easy to maintain. Operation can be set for maximum or minimum security by means of a selector switch (A and B). The respective switching status of the relay is indicated by a LED.
LEO Record is an autonomous battery powered instrument with digital display designed to record pressure and temperature over long periods. The pressure is measured and displayed once per second (shortest interval). The top display indicates the actual pressure, the bottom display shows the record status. All LEO Record versions have two operating keys. The left key is to turn the instrument on, to select the functions and the pressure units. The right key executes the selected function or unit.:
The ToughSonic 14 ultrasonic sensor has a maximum range of 14 feet (4.3 meters). Like all ToughSonic sensors, it’s built for durability and ease of use in tough industrial environments. It’s fully submersible, corrosion resistant, shock resistant and all around tough. It’s also fully configurable with our SenixVIEW software. ToughSonic 14s include our famous “Teach” feature for push button configuration. This compact sensor is used around the world on remote liquid level systems, heavy equipment, factory automation applications and more. This is our most popular sensor. For longer range applications or for chemically resistant sensors, please see our full line of ToughSonic and ToughSonic CHEM sensors.
The ToughSonic 30 ultrasonic sensor has a maximum range of 30 feet (9.1 meters). Like all ToughSonic sensors, it’s built for durability and ease of use in tough industrial environments. It’s fully immersible, corrosion resistant, shock resistant and all around tough. It is also fully configurable with SenixVIEW software. The 1.5 inch (38.1 mm) housing has 1.5 inch NPT threading on each end and a smooth middle section for a variety of mounting options. This sensor has a 9-wire cable that allows up to six simultaneous serial, analog and/or switch outputs. These workhorse sensors are used around the world in remote monitoring and demanding factory environments.
ToughSonic 50 ultrasonic sensors have a maximum range of 50 feet (15.2 meters). Like all Toughsonic sensors, they are built for durability and ease of use in tough industrial environments. ToughSonic 50s are fully immersible, corrosion resistant, shock resistant and all around tough. They are also fully configurable with SenixVIEW software. ToughSonic 50s are available in three different housings, each with either RS-232 or RS-485 serial interfaces. These 9-wire sensors allow up to six simultaneous serial, analog and/or switch outputs. These workhorse sensors are used around the world in remote liquid level applications and harsh factory environments.
The ToughSonic CHEM 10 is a chemically resistant ultrasonic sensor designed for applications where corrosive liquids or gasses are present, but it is an excellent choice for benign environments as well. With a maximum range of 10 feet (3 meters), it is the smallest sensor in the ToughSonic CHEM sensor family. The ToughSonic CHEM 10 is sealed in a PVDF (Kynar®) housing. It is fully submersible, chemical resistant and shock resistant. It has a permanently attached, potted-in-place 9-wire cable that allows up to six simultaneous serial, analog and/or switch outputs. It is fully configurable with SenixVIEW configuration and analysis software. Chem series sensors and SenixVIEW software put the power of ultrasonics in your hands. You can quickly adjust, optimize, save and clone your applications quickly without calibration! These sensors are housed in a rugged, chemically inert PVDF sealed housing for long life. They mount above the material surface and measure distance downward without contact. Outputs respond to that measured distance. Applications include pump control, bulk inventory, batch processing, water management and high/low level alarms.
The ToughSonic CHEM 20 is an ultrasonic sensor designed for measurement applications involving corrosive chemical liquids or gasses, but it is an excellent choice for benign materials as well. With a maximum range of 20 feet (6.1 meters), it is the mid-range option within the ToughSonic CHEM sensor family. The sensor is sealed in a PVDF (Kynar®) housing. It’s fully submersible, chemical resistant and shock resistant. The ToughSonic CHEM 20 has a permanently attached, potted-in-place 9-wire cable that allows up to six simultaneous serial, analog and/or switch outputs. It’s fully configurable with SenixVIEW configuration and analysis software. CHEM series sensors and SenixVIEW software put the power of ultrasonics in your hands. You can quickly adjust, optimize, save and clone your applications quickly without calibration! These sensors are housed in a rugged, chemically inert PVDF sealed housing for long life. They mount above the material surface and measure distance downward without contact. Outputs respond to that measured distance. Applications include pump control, bulk inventory, batch processing, water management and high/low level alarms.
The ToughSonic CHEM 35 ultrasonic sensor is designed for distance measurement applications where corrosive chemical liquids or gasses are present, but it is an excellent sensor for benign environments as well. With a maximum range of 35 feet (10.7 meters), it is the longest range member of the ToughSonic CHEM sensor family. The sensor is sealed in a PVDF (Kynar®) housing. It’s fully submersible, chemical resistant and shock resistant. The ToughSonic CHEM 35 has a permanently attached, potted-in-place 9-wire cable that allows up to six simultaneous serial, analog and/or switch outputs. It’s fully configurable with SenixVIEW configuration and analysis software. CHEM series sensors and SenixVIEW software put the power of ultrasonics in your hands. You can quickly adjust, optimize, save and clone your applications quickly without calibration! These sensors are housed in a rugged, chemically inert PVDF sealed housing for long life. They mount above the material surface and measure distance downward without contact. Outputs respond to that measured distance. Applications include pump control, bulk inventory, batch processing, water management and high/low level alarms.
Setpoint display with communication interface visualizes instructions for the operator during product change or format changes. Readability is optimized for intuitive user prompting: The red/green LEDs indicate whether a format part change is required. With the help of the backlit display, designations or setpoint and actual value can be clearly displayed. The operator confirms the changeover using an acknowledgment button. This means that faulty machine settings with the setpoint display AP10T can be avoided in the future, making flexible production machines more process-reliable.
The AAP20 position indicator with Industrial Ethernet interface intuitively guides the operator to the correct machine setting when changing products or changing formats. The backlit display shows setpoint and actual values precisely. Two LEDs clearly show the machine operator the direction in which the adjustment must be made. With the AP20 position display, faulty machine settings can thus be avoided in the future, making flexible production machines completely process-reliable.
The DE04 is a freely programmable and battery-powered position indicator. The position indicator DE04 provides maximum flexibility, since the always same basic device can be parameterized to the desired spindle pitch, display accuracy and reading position in an application-specific manner. Parameterization is conveniently performed via programming software via an external interface.
The DE10 is a freely programmable and battery-powered position indicator. The position indicator DE04 provides maximum flexibility, since the always same basic device can be parameterized to the desired spindle pitch, display accuracy and reading position in an application-specific manner. Parameterization is conveniently performed via programming software via an external interface.
The DE10P position indicator is a freely programmable and battery-powered position indicator. The DE10P position indicator provides maximum flexibility, since the always same basic device can be parameterized to the desired spindle pitch, display accuracy and reading position in an application-specific manner. The parameterization is performed directly on the device using operating keys.
Absolute position display with communication interface for linear or slide adjustment intuitively guides the operator to the correct machine setting when changing products or changing formats. Readability is optimized for intuitive user prompting: The backlit display clearly shows the setpoint and actual value, and the two LEDs clearly indicate the direction in which the adjustment must be mad.
The turbine flowmeter model DOT consists of a helically shaped turbine rotor supported in two tungsten carbide bearings, the rotor being solid ferritic stainless steel of a grade compatible with the metered liquid, all contained within a housing of non-magnetic stainless steel. A pick off coil having a permanent magnet core is mounted in the housing adjacent to the rotor blade tips such that a magnetic circuit is set up via the rotor blades. Rotation of the rotor varies the reluctance of this magnetic circuit and the flux changes induce a small voltage in the coil, the frequency of which is directly proportional to the rotor speed and therefore proportional to the volumetric flow rate. The effects of increasing viscosity reduce the linear flow range and shifts the k-factor. Further, the effect of viscosity depends on the frequency (RPM of rotors). Therefore, smaller the meter, higher is the effect of viscosity on the linearity curve.
The Kobold Differential Pressure Transmitter model PAD is a micro processor-based high performance transmitter, which has flexible pressure calibration and output, automatic compensation of ambient temperature and process variable, configuration of various parameters, communication with HART ® protocol. The application is very various, as measuring pressure, flow and level by application method. All data of sensor is to be input, modified and stored in EEPROM. As an option the Kobold Pressure Transmitter is also available as a flow meter. This flowmeter model PAD-F has added the totalizing function in the PAD transmitter. So it is available to check the flow rate and totalizing flow. It measures the flow rate by using differential pressure without compensation of temperature and static pressure. The shape of the PAD-F is the same as the standard device and it is only the terminal block which is different since there are two more terminals for the read-out of the pulse output.