The pressure test pump LR-Cal LPP 1000 is used to generate pressure for checking, adjusting and calibrating mechanical and electronic pressure measuring instruments by comparative measurements. These pressure tests may be carried out in laboratories, workshop or on site at the measuring point.
If the instrument to be tested and a sufficiently accurate reference measuring instrument are connected up to the test pump, the same pressure is applied to the two measuring instruments when the pressure test pump LR-Cal LPP 1000 is operated. By comparing the two measure valuses at random pressure values, the accuracy can be verified or the instrument under test can be adjusted.
Despite its compact dimensions, the pressure test pump LR-Cal LPP 1000 is easy to operate and allows for exact generation of the required test pressures The LR-Cal LPP 1000 is fitted with a fine adjustment valve for a precise adjustment of pressures.
The reference instrument is screwd directly on the top of the pump and the unit under test is connected by means of the connection tube incorporating an adapter 1/4" BSP female thread (freely rotating), contained in the scope of delivery.
Standard scope of delivery:
The DT722 is a ruggedindustrial relative humidity and temperature transmitter designed for process applications where accurate, stable measurement and control of humidity and temperature is required
The micro processor controland multi-point calibration gives the PCMini52 RH probe excellent performance in terms of accuracy and linearity. The mini probe can provide two linear analog outputs for temperature and relative humidity, dew point, absolute humidity or wet bulb temperature.
The PC 33 & 52 series offers a comprehensiverange of relative humidity probes for accurate, stable and repeatable measurements. Available with analog output signals, the PC series can be installed in a wide variety of applications.
The PC series offers a comprehensive range of relative humidity probes for accurate, stable and repeatable measurements. Available with analogue or digital output signals, the PC series can be installed in a wide variety of applications.
The HygroSmart HS3 is an accurate, stable and user configurable probe designed to provide reliable humidity measurement for process control in a wide range of applications. The HS3 probe features an interchangeable sensor to ensure minimal process downtime and low cost of ownership.
The MDM25 is a portable, battery-operated handmeter, and is available with a number of different probe confi gurations. It displays relative humidity, temperature and one calculated value, making this hand-held hygrometer suitable for a wide range of applications. The user can choose to display either °C or °F.
PFMini72 relative humidityprobes are equipped with the Hygrosmart relative humidity sensor/converter. This interchangeable module has miniaturized electronics and does not require recalibration.
The Easidew PortableHygrometer has been designed to make spot checks of the dew point in air and gases as simple as possible. This completely self-contained instrument weighs only 4kg and is delivered ready to use. Simply connect your sample gas to the Quick Connect fittings, turn on the instrument and it will automatically begin to measure the dew point of the applied sample.
The HygroCal100 provides a stable test chamber to quickly evaluate the performance of relative humidity sensors across a wide range of 5 to 95% relative humidity.Its intuitive 4” touch screen display and interface allows the probes under test to be fully integrated with the chamber and user interface (UI), so up to 7 probes with a variety of diameters and output signals can be powered, monitored and logged simultaneously by one self contained unit.The HygroCal100 allows you to automate your calibration procedure with ease, and will provide a complete logged output of all probes under test against the reference instrument in csv format, ready to download to your USB memory device.Coupled with an Optidew Vision chilled mirror hygrometer, the HygroCal100 becomes a powerful transportable calibration facility.The HygroCal100 can optionally be fitted with a high capacity battery pack, which can power the generator and 7 sensors under test for up to 8 hours. The unit can also run from mains power while charging the battery.
The MTN/VM220 is a compact,rechargeable, portable handheld Vibration meter designed to conform to ISO10816-3 and operate with a constant current accelerometer providing accurate vibration measurements. Features comprise of the ability to store up to 100 time-stamped readings, including; RMS, peak, peak-peak, crest factor and bearing conditions all on an easy to read vibrant colour LCD display.
General purpose top-entry constant current accelerometer with isolated AC output. Made from robust stainless steel throughout for long term vibration analysis in harsh environments. Sealed to IP67 and includes 2-pin C5015 military style connector. Available with a wide range of mountings.
ATEX and IECEx Group II certified. General purpose top-entry constant current accelerometer with isolated AC output. Made from robust stainless steel throughout for long term vibration analysis in harsh, hazardous gas and dust environments. Sealed to IP67 and includes 2-pin C5015 military style connector. Available with a wide range of mountings.
Due to their short measuring wavelength and the high temperature range of up to 2,200°C the pyrometers optris CT 1M and 2M are ideally suited for employment in high-temperature measurements of metals, metal oxides, and ceramics. The short measuring wavelength of the infrared pyrometers additionally decreases measuring errors during low or changing emission levels.
The small sensor head allows for easy installation in limited and cramped spaces. Moreover, it reliably measures temperatures even in ambient temperatures of up to 125°C.
Due to its short measuring wavelength and a temperature range from 50°C on, the pyrometer optris CT 3M, is ideally suited for employment inlow-temperature measurements of metals and composite materials. The quick response time of only 1 ms allows for a problem-free use of the metal thermometer in fast processes. The electronics box of the measuring device allows a flexible terminal device through selectable analog outputs as well as various optional digital interfaces.
Due to its special spectral range of 3.43 µm, the pyrometer optris CT P3 is perfectly suited for precise temperature measurements of thin plastic films like PE, PP and PS.
It measures temperatures precisely from 50 °C up to 400 °C and its measuring head offers a temperature resistance of up to 75°C without additional cooling. Its separate electronics box is acclaimed for its easily accessible programming buttons and its illuminated LCD display.
Due to its special spectral range of 5.0 µm, the pyrometer optris CT G5 is perfectly suited for the measurement of glass temperatures, e.g. during container glass production, vehicle glass production or solar cell production.
The IR thermometer’s stainless steel measuring head is extremely small and can be employed in ambient temperatures of up to 85°C without additional cooling. A multi-installation of the pyrometers, e.g. in series as line scanner, is therefore cost-efficient and can be performed even in limited spaces.
Due to its special spectral region of 7.9 µm, the innovative pyrometer optris CT P7 is perfectly suited for temperature measurements of thin plastic materials like PET, PU, PTFE, PA or CTA.
It measures temperatures precisely from 0°C up to 710°C and its measuring head offers a temperature resistance of up to 85°C without additional cooling. The separate electronics box of the foil thermometer is acclaimed for its easily accessible programming buttons and its illuminated LCD display.