Comtest
{{image.AltTag}} {{image.AltTag}}
Default Image Default Image

{{details.product.ModelName}}

Sku: {{details.product.ModelNumber}}

Incremental, miniature design, analog interface 1 VSS
{{details.product.PriceUnits}}
Please fill out this field...
Please enter a number...
Please enter at least 1...
Please enter at max 999999...
You purchased this item on {{details.product.OrderHistory[0].OrderDate | date : 'yyyy-MM-dd'}}

 

  • Repeat accuracy max. ±1 μm
  • Output circuit sin/cos 1 VSS
  • Signal period 1000 μm (analog)
  • Real-time signal processing
  • Works with MB100/1 magnetic tape

Mechanical data

Feature Technical data Additional information
Housing

aluminum blue

  
Sensor/band reading distance 0.1 … 0.4 mm

over the wohle measuring range, without masking tape
Cable sheath PUR 6-adrig ø5.1-0.2 mm

Electrical data

Feature Technical data Additional information
Operating voltage 5 V DC ±5 %

no reverse polarity protection
Current consumption ≤30 mA

off-load
Output signals sin, cos, /sin, /cos  
Output voltage 1 VPP ±10 %

with RA = 120 Ohm until 1 kOhm at 0 ... 20 °C
Output impedance

RLoad

>75 Ω		  
Signal period 1000 µm  
Offset voltage 2.5 V ±0.5 %  
Phasing 90°±1°, ±3° (20 kHz)  
Real-time requirement

speed-proportional signal output

  
Type of connection D-Sub

15-pole, 1x socket

Signal pattern

LS100 Signal pattern

E: Reference voltage 2.5 V
F: 1 VSS ±10 %
Ratio of G to H: Offset ±10 mV
M: 90° ±1.0° / ±3° (25 kHz)

System data

Feature Technical data Additional information
Linearity deviation ±2 µm at TU = 20° C, reading distance 0.2 mm
Repeat accuracy ±1 µm

unidirectional
Measuring range ∞  
Travel speed ≤20 m/s  

Ambient conditions

Feature Technical data Additional information
Ambient temperature -20 … 70 °C

sensor head
Storage temperature -20 … 85 °C

sensor head
Relative humidity 100 % condensation admissible
EMC EN 61000-6-2 interference resistance / immission
  EN 61000-6-4 emitted interference / emission
Protection category IP67 EN 60529
Shock resistance 2000 m/s2, 11 ms

EN 60068-2-27
Vibration resistance 200 m/s2, 50 Hz … 2 kHz EN 60068-2-6

Ordering table

Feature Order data Specifications Additional information
Operating voltage

A5

 5 V DC  
  24 V DC, on request  
 
Cable sheath

BPVC

 PVC  

PUR

 PUR  
 
Cable length

C...

 01.0 ... 20.0 m, in intervals of 1 m  
  others on request  

Ordering key

LS100-A-B-C

Pin assignment

Signal PIN
nc 1
GND (OV) 2
nc 3
nc 4
/B (cos­) 5
B (cos+) 6
A (sin+) 7
/A (sin­) 8
nc 9
GND (OV) 10
nc 11
+UB 12
nc 13
GND (OV) 14
nc 15

Hint for mounting

A, Sensor/tape reading distance ≤0.4 mm
B, Lateral offset ±2 mm
C, Alignment error ±3°
D, Longitudinal inclination ±1°
E, Lateral inclination ±3°

HintThe length of the cable between the sensor and connector cannot be subsequently increased or decreased.

LS100 Hint for mounting
Symbolic representation

Scope of delivery

  • LS100
  • Mounting instructions
  • Fastening set
  • distance gage