Compact wire-actuated encoder with a max. measurement length of 2000 mm and an analog output.
Compact wire-actuated encoder for rotary encoders with max. 36 mm diam. flange
Very robust wire-actuated encoder in compact design for numerous applications including crane construction, stage construction, warehousing technology, etc., with a measuring length up to 3000 mm. Easy, universally changeable installation.
The new KOBOLD flowmeter Type MIK is used for measuring and monitoring the smaller and medium-sized flows of conductivity liquids in pipes. The device operates according to the electromagnetic measurement principle. According to Faraday’s Law of magnetic induction, a voltage is induced in a conductor moving through a magnetic field. The electrically conductive measuring agent acts as the moved conductor. The voltage induced in the measuring agent is proportional to the flow velocity and is, therefore, a value for the volumetric flow. The flowing media must have a minimum conductivity. The induced voltage is picked up by two sensing electrodes that are in contact with the measuring agent and sent to the measuring amplifier. The flow rate will be calculated based on the cross-sectional area of the pipe. The measurement is not depending on the process liquid and its material properties such as density, viscosity and temperature. The device may be equipped with a switch, frequency or analogue output. Moreover, there is a compact electronic system to be selected from, which contains a switch and an analogue output. The device series is completed by optionally obtainable dosing and counter electronic system. The counter electronics system shows the current flow rate on the first line of the display and shows the partial or overall volume on the second line. A dosing electronic system controls simple filling duties and also measures the flow rate, overall volume and filling volume. The analogue output and two relay outputs can be utilised for the further processing of signals.
Media
Applications
Flow monitoring, Flow measuring, dosing and counting for:
In the 23SX series high-precision pressure transmitters, temperature dependencies and non-linearity are precisely compensated for by means of a mathematical model in the microcontroller. In addition to the RS485 interface with Modbus RTU protocol, there is also the option of outputting the measurement results as a scalable analogue signal via the integrated D/A converter. The fully welded construction without internal seals is suitable for dynamic applications. Only stainless steel is in contact with the media.
The pressure transmitters of the 21C series with ratiometric 0,5...4,5V output combine chip-in-oil measuring cells with conventional electrical connections and pressure connections, making them ideal for industrial use. The transmitters are extremely resistant to environmental influences and deliver accurate measurement results over a temperature range of -40 °C to 125 °C.
The compact pressure transmitters of the 21Zio series can be used both as a pressure measuring instrument and as a pressure switch. Thanks to the universal IO-Link interface according to IEC 61131-9, the sensor is flexible and easily and quickly integrable into intelligent automation and other systems. The switching functions and other parameters can be called up and configured directly via IO-Link. In this way, machine downtimes are reduced to a minimum and personnel are relieved.
In the 23SXc series high-precision pressure transmitters, temperature dependencies and non-linearity are precisely compensated for by means of a mathematical model in the microcontroller. With the CANopen interface, KELLER offers a highly accurate pressure transmitter that is optimally suited for a wide variety of automation solutions. The fully welded construction without internal seals is suitable for dynamic applications. Only stainless steel is in contact with the media.
The infrared laser thermometer optris CTlaser F2 offers a special measuring wavelength for temperature measurement of CO2 flame gases. This makes it optimally suited for e.g. combustion processes, garbage incineration, or processes in chemical reactors.
The IR thermometer’s temperature range covers temperatures from 200°C up to 1,650°C, while the stainless steel measuring head is heat-resistant up to 85°C without additional cooling. Optional cooling and protection equipment is available, ensuring exact temperature measurement even in rough surroundings.
The infrared thermometer optris CTlaser F6 is an upgraded version of the pyrometer optris CTlaser F2. It has also been designed for temperature measurement of CO flame gasses, e.g. in combustion processes, in garbage incineration, or in processes in chemical reactors.
The pyrometer measures temperatures precisely between 200°C and 1,650°C. Due to the measuring head being made of stainless steel, it is heat-resistant up to 85°C without additional cooling. Also, optional cooling and protection equipment is available, ensuring exact temperature measurement even in rough surroundings.
The infrared thermometer optris CTlaser G5 has been specifically designed for measurement of glass temperatures, especially for container glass, lightbulb production, vehicle glass production as well as in the manufacturing of solar cells. Last but not least, the IR thermometer optris CTlaser G5 allows for temperature measurement of smallest objects of 1 mm from a distance of 70 mm.
The IR thermometer optris CSlaser G5 HF offers very quick response times and is thus perfectly suited for fast processes.
The infrared thermometer optris CTlaser G7 is perfectly suited for precise temperature measurement of ultra-thin glass surfaces. It offers a broad temperature range from 100 °C up to 1200 °C and can be employed in temperatures of up to 85°C without additional cooling.
The IR thermometer for measurements of plastic foils and glass temperatures is capable of targeting smallest objects of 1.6 mm (0.06 in) in a distance of 70 mm (2.76 in). Its standardized two-wire interface additionally allows for a reliable transfer of measurement data and easy integration into a PLC.
The infrared video thermometer optris CSvideo 3M is perfectly suited for low-temperature measurement of metals and composite materials starting from 50 °C. Parallel use of the video module and the laser sight allow for an easy and exact measuring field marking even if the measuring object is located in hard-to-access areas.
The new Optris video pyrometers CTvideo 1M / 2M allow a parallel use of video and crosshair laser aiming for an optimal measuring field adjustment even in processes with limited access. It reliably measures temperatures of metals or ceramics and, due to its short measuring wavelength, reduces measuring errors of surfaces with low or unknown emissivity.
The infrared video thermometer optris CTvideo 3M is perfectly suited for low-temperature measurement of metals and composite materials starting from 50°C. Parallel use of the video module and the laser sight allow for an easy and exact measuring field marking even if the measuring object is located in hard-to-access areas
Due to its short measuring wavelength the ratio pyrometer optris CTratio 1M is especially suited for measurement of extremely high metal temperatures and the very short response time allows for surveillance of very fast processes.
The ratio pyrometer is largely resistant against dust, steam and dirty observation windows. This allows for an accurate measurement in cases of window soiling of up to 90 percent. The pyrometer additionally measures reliably in cases where the measuring object only covers 5 percent of the measuring point or moves very fast.
Rugged, electrically isolated sensing head and fiber optic cable for ambient temperatures up to 315 °C without cooling.
Due to its short measuring wavelength the ratio pyrometer optris CTratio 2M is especially suited for measurement of extremely high metal temperatures and its very short response time allows for surveillance of very fast processes.
Rugged, electrically isolated sensing head and fiber optic cable for ambient temperatures up to 315 °C without cooling
The Load cell 9363 is a multipurpose stainless steel S-type load cell which can be used in tension or compression. This product is suitable for a wide range of hybrid scales, overhead track scales, belt scales, and process weighing applications. Reliable sealing is ensured by the proprietary TRANSEAL potting compound and additional mechanical protection of the strain gage area. This product meets the stringent Weights and Measures requirements throughout Europe and the USA.
The pyrometer optris CSmicro LT LTH is equipped with an innovative, miniaturized stainless steel measuring head, optimally suited for installation in limited spaces. Its small size and its temperature resistance up to 180°C make the mechanic integration of the measuring head especially cost-efficient.
The intelligent LED display works optionally as alarm signal, target support, self-diagnosis or temperature-code display. The placement of electronic components within the cable allows for a high temperature resistance of the measuring head.
New: The CSmicro series can now be operated via the new IR mobile App (Android). The App enables to monitor and analyze infrared temperature measurements on a connected smartphone or tablet.
The pyrometer optris CSmicro LT HS sets new performance standards in the measurement of slightest temperature differences of 0.025 K. Due to the stainless steel measuring head, it is perfectly suited for installation in especially limited and cramped spaces.
The compact infrared thermometer measures precisely in a temperature range from -20°C to 150°C and is equipped with an intelligent LED display, utilizable as alarm signalization, target support, self-diagnosis or temperature-code display.
The infrared thermometer optris CSlaser LT consists of a robust stainless steel sensor with integrated electronics, enabling easy integration into your system.
Its innovative double laser sight allows for an exact marking of measurement spots even on smallest objects. A variety of optics enables adaptation for a broad range of different applications. Additionally, the IR thermometer offers a standardized two-wire interface for a reliable transfer of measurement data and easy integration into a Siemens SPS.
The infrared thermometer optris CSlaser hs LT allows for measuring of the slightest temperature differences from 0.025°C on, which plays an important role for e.g. continual surveillance of product homogeneities.
In addition, its double laser sight ensures an exact marking of measuring fields and a variety of scopes offers high adaptability with various applications.