{{image.AltTag}} {{image.AltTag}}
Default Image Default Image


Sku: {{details.product.ModelNumber}}

Induction Flow Meters
Please fill out this field...
Please enter a number...
Please enter at least 1...
Please enter at max 999999...

You purchased this item on {{details.product.OrderHistory[0].OrderDate | date : 'yyyy-MM-dd'}}

Induction flow meters of the type series FLONET FS10XX are intended for professional flow-rate measurements of electrically conductive fluids including abrasive particles. The meters meet most demanding requirements regarding measurement accuracy and long-term parameter stability. Flow-rate measurements in both directions are possible. The flow sensors have excellent wear resistance and its effect on the fluid flow characteristic or pressure in the connecting piping is negligible. The associated electronic unit supplies power to the sensors unit and processes the flow-rate signals. The meters have current and frequency outputs. Communication with external devices is via the Hart communication protocol. The meter display information is in English

internal diameter d 100, 150 and 200mm (flangeless connections) 250, 300, 350, 400 and 450mm
rated pressure PN 10, 16 (depending on inside diameter to 150 PN16 from 200 PN10)
min. conductivity of measured fluid 5μS/cm
max. temperature of measured fluid +150°C
electrode material stainless steel 1.4571, Hastelloy-C4
sensor lining wear-resistant material
wearability (DIN 52108) maximum wear loss 5cm2/50cm3
design version compact or remote
measurement accuracy ±0.5% for flow rate 5 to 100% qs (calibrated with water)
measurement range 0.1 to 10m/sec
signal outputs current output 4 to 20mA ~ (0 to qs) frequency output 0 to 1.000Hz ~ (0 to qs)
communication protocol HART
power source 90 to 250V AC, 50 to 60Hz, 10V A, 15 to 50V DC
ambient temperature -40°C to +74°C
protection class IP67 / IP68 (sensor in remote version)