Siko Magnetic sensor MSK400/1
Siko Magnetic sensor MSK400/1
Sku: SIK-MSK400-1
Siko Compact sensor, incremental, digital interface, resolution 1 mm
Product Information
Profile MSK400/1:
Max. resolution 1 mm
Repeat accuracy of ±1 increment
Works with magnetic tape MB400
Reading distance ≤4 mm
Techanical data
| Feature | Technical data | Additional information |
|---|---|---|
| Housing |
white plastic |
|
| Sensor/band reading distance | 0.1 … 4 mm | |
| Cable sheath |
PUR suitable for drag-chain use |
4-wire ø4.4-0.4 mm |
| Cable bending radius | 5x cable diameter | static |
| 7.5x cable diameter | dynamic | |
| Service life of cable | >5 million cycles | under the following test conditions: travel range 4.5 m travel speed 3 m/s acceleration 5 m/s2 ambient temperature 20 °C ±5 °C |
Electrical data
| Feature | Technical data | Additional information |
|---|---|---|
| Operating voltage | 24 V DC±20 % |
reverse polarity protected |
| Current consumption | <20 mA |
off-load |
| Output circuit | PP | |
| Output signals | A, B |
90° off-phase |
| Output signal level high | >UB – 3.5 V | |
| Output signal level low | <2 V | |
| Latency | 1.5 µs | |
| Real-time requirement |
speed-proportional signal output |
|
| Type of connection |
open cable end |
|
|
plug connector |
7-pole |
Signal patterns
System data
| Feature | Technical data | Additional information |
|---|---|---|
| Resolution | 1 mm |
with quadruple evaluation |
| System accuracy | ±(1 + 0.03 x L) mm, L in m |
at TU = 20 °C |
| Repeat accuracy | ±1 mm | |
| Measuring range | ∞ | |
| Travel speed | ≤10 m/s |
Ambient conditions
| Feature | Technical data | Additional information |
|---|---|---|
| Ambient temperature | -10 … 70 °C | |
| Storage temperature | -30 … 80 °C | |
| Relative humidity | 100 % | condensation admissible |
| EMC | EN 61000-6-2 | interference resistance / immission |
| EN 61000-6-4 |
emitted interference / emission |
|
| Protection category | IP67 | EN 60529 |
| Shock resistance | 500 m/s2, 11 ms |
EN 60068-2-27 |
| Vibration resistance | 100 m/s2, 5 … 150 Hz | EN 60068-2-6 |
Ordering table
| Feature | Order data | Specifications | Additional information |
|---|---|---|---|
| Type of connection |
AE1 |
open cable ends | |
|
E6X |
round connector without mating connector | ||
| cable extension on request | |||
| Cable length |
B… |
01.0 … 20 m, in intervals of 1 m | |
| others on request | |||
Ordering key
MSK400/1-A-B
For more information, click here!
Pin assignment
Not inverted
| Signal | E1 | E6X |
|---|---|---|
| GND | black | 1 |
| A | red | 2 |
| B | orange | 3 |
| nc | 4 | |
| +UB | brown | 5 |
| nc | 6 | |
| nc | 7 | |
| Shielding | white |
Hint for mounting
| A, Sensor/tape reading distance | ≤4 mm |
| B, Lateral offset | ±2 mm |
| C, Alignment error | ±3° |
| D, Longitudinal inclination | ±3° |
| E, Lateral inclination | ±3° |
Symbolic representation
Scope of delivery
- MSK400/1
- Mounting instructions
- Fastening set