Siko Magnetic sensor LS100
Product Information
- Repeat accuracy max. ±1 μm
- Output circuit sin/cos 1 VSS
- Signal period 1000 μm (analog)
- Real-time signal processing
- Works with MB100/1 magnetic tape
Mechanical data
| Feature | Technical data | Additional information |
|---|---|---|
| Housing |
aluminum blue |
|
| Sensor/band reading distance | 0.1 … 0.4 mm |
over the wohle measuring range, without masking tape |
| Cable sheath | PUR | 6-adrig ø5.1-0.2 mm |
Electrical data
| Feature | Technical data | Additional information |
|---|---|---|
| Operating voltage | 5 V DC ±5 % |
no reverse polarity protection |
| Current consumption | ≤30 mA |
off-load |
| Output signals | sin, cos, /sin, /cos | |
| Output voltage | 1 VPP ±10 % |
with RA = 120 Ohm until 1 kOhm at 0 … 20 °C |
| Output impedance |
RLoad >75 Ω |
|
| Signal period | 1000 µm | |
| Offset voltage | 2.5 V ±0.5 % | |
| Phasing | 90°±1°, ±3° (20 kHz) | |
| Real-time requirement |
speed-proportional signal output |
|
| Type of connection | D-Sub |
15-pole, 1x socket |
Signal pattern
E: Reference voltage 2.5 V
F: 1 VSS ±10 %
Ratio of G to H: Offset ±10 mV
M: 90° ±1.0° / ±3° (25 kHz)
System data
| Feature | Technical data | Additional information |
|---|---|---|
| Linearity deviation | ±2 µm | at TU = 20° C, reading distance 0.2 mm |
| Repeat accuracy | ±1 µm |
unidirectional |
| Measuring range | ∞ | |
| Travel speed | ≤20 m/s |
Ambient conditions
| Feature | Technical data | Additional information |
|---|---|---|
| Ambient temperature | -20 … 70 °C |
sensor head |
| Storage temperature | -20 … 85 °C |
sensor head |
| Relative humidity | 100 % | condensation admissible |
| EMC | EN 61000-6-2 | interference resistance / immission |
| EN 61000-6-4 | emitted interference / emission | |
| Protection category | IP67 | EN 60529 |
| Shock resistance | 2000 m/s2, 11 ms |
EN 60068-2-27 |
| Vibration resistance | 200 m/s2, 50 Hz … 2 kHz | EN 60068-2-6 |
Ordering table
| Feature | Order data | Specifications | Additional information |
|---|---|---|---|
| Operating voltage |
A5 |
5 V DC | |
| 24 V DC, on request | |||
| Cable sheath |
BPVC |
PVC | |
|
PUR |
PUR | ||
| Cable length |
C… |
01.0 … 20.0 m, in intervals of 1 m | |
| others on request | |||
Ordering key
LS100-A-B-C
Pin assignment
| Signal | PIN |
|---|---|
| nc | 1 |
| GND (OV) | 2 |
| nc | 3 |
| nc | 4 |
| /B (cos) | 5 |
| B (cos+) | 6 |
| A (sin+) | 7 |
| /A (sin) | 8 |
| nc | 9 |
| GND (OV) | 10 |
| nc | 11 |
| +UB | 12 |
| nc | 13 |
| GND (OV) | 14 |
| nc | 15 |
Hint for mounting
| A, Sensor/tape reading distance | ≤0.4 mm |
| B, Lateral offset | ±2 mm |
| C, Alignment error | ±3° |
| D, Longitudinal inclination | ±1° |
| E, Lateral inclination | ±3° |
The length of the cable between the sensor and connector cannot be subsequently increased or decreased.
Symbolic representation
Scope of delivery
- LS100
- Mounting instructions
- Fastening set
- distance gage