Siko Draw-Wire Encoder SG10
Product Information
Miniature wire-actuated encoder for capturing measurement distances with a maximum measuring length of 2000 mm.
- Compact design
- Universally applicable thanks to standardized interfaces
- Easy mounting
- Measurement lengths up to max. 2000 mm
- Potentiometer, voltage, power output or incremental encoder
- Housing made of reinforced plastic
Mechanical data
| Feature | Technical data | Additional information |
|---|---|---|
| Housing | reinforced plastic | |
| Wire design | ø0.45 mm |
rustproof stainless steel, plastic-coated |
| ø0.45 mm | rustproof stainless steel | |
| Extension force | ≥2 N | |
| Measured distance/ rope drum revolution | 100 mm | |
| Cable length | ≤30 m |
P10 + MWI encoder type |
| ≤20 m |
MWU encoder type |
|
| Weight | ~0.2 kg |
Electrical data
Encoder potentiometer
| Feature | Technical data | Additional information |
|---|---|---|
| Power rating | 1.5 W at 70 °C | |
| Resistance | 10 kΩ | |
| Resistance tolerance | ±5 % | |
| Linearity tolerance | ±0.25 % | |
| ±0.1 % | encoder type MWI/0,1 |
Transducer, power output
| Feature | Technical data | Additional information |
|---|---|---|
| Operating voltage | 24 V DC ±20 % |
at ≤500 Ω load |
| Output current | 4 … 20 mA |
Transducer, voltage output
| Feature | Technical data | Additional information |
|---|---|---|
| Operating voltage | 15 … 28 V DC |
at 3 mA, no load |
| Output voltage | 0 … 10 V DC | |
| Load | ≤15 mA |
*
Measurement transducers permit optimum adjustment of the output current and output voltage to the measuring range. The measurement transducer is pre-set at the works so that an output signal of 4 … 20 mA (MWI) or 0 … 10 V DC (MWU) is available.
System data
| Feature | Technical data | Additional information |
|---|---|---|
| Repeat accuracy | ±0.15 mm | |
| Travel speed | ≤800 mm/s |
Ambient conditions
| Feature | Technical data | Additional information |
|---|---|---|
| Ambient temperature | -10 … 80 °C |
without transducer |
| 0 … 50 °C |
with transducer |
|
| Protection category |
IP50 (encoder part potentiometer) |
EN 60529 |
| IP54 (incremental) | EN 60529 |
Ordering table
Ordering information
For measuring range 2000 I, the rotary encoder IV2800 mounted directly from the factory must be ordered separately.
| Feature | Order data | Specifications | Additional information |
|---|---|---|---|
| Measuring range |
A… |
300, 500, 1000 in mm | encoder types Ω, I, U (potentiometer and transducer) |
|
2000I |
only with encoder type S5, S5R | ||
| Wire design |
BS |
stainless steel wire | |
|
SK |
steel wire, plastic-sheathed | ||
| Encoder type |
CP10 |
potentiometer with 10kΩ | |
|
MWI |
transducer 4 … 20 mA | ||
|
MWU |
transducer 0 … 10 V | ||
|
S5 |
rotary encoder IV2800, axial cable outlet | ||
|
S5R |
rotary encoder IV2800, radial cable outlet | ||
| others on request | |||
| Cable length |
D0.5 |
0.5 m | with encoder type P10 or MWI/MWU |
|
… |
1 … 20 m, in steps of 1 m | with encoder type P10 or MWI/MWU | |
|
IG |
specified via mounted encoder | at measuring range 2000 I | |
Ordering key
SG10-A-B-C-D
For more information, click here!