Siko Actuator AG25 Fieldbus/IE
Product Information
Thanks to special power and control electronics, absolute sensor technology and integrated position controller, the AG25 ultra-compact and powerful actuator is particularly well suited for format adjustments optimized for setup times. Due to the variety of available interface standards, quick and smooth integration into the existing controller is possible.
- Small dimensions, high power density
- easy mounting and commissioning
- High flexibility, high protection category
- stainless steel 14 mm diam. hollow shaft, robust housing
- Brushless EC motor with a long service life
- solid absolute sensor, magnetic sensing technology
- integrated power and control electronics
- Integrated Industrial-Ethernet-Fieldbus
- Integrated positioning controller
- M12 component mounting technology
- Industry 4.0 ready
Mechanical data
| Feature | Technical data | Additional information |
|---|---|---|
| Shaft | stainless steel | |
| Housing |
glass-fiber reinforced plastic / zinc die-cast |
|
| Clamping ring | stainless steel | |
| Torque pin | stainless steel |
form A |
| stainless steel | form B | |
| Nominal torque/rated speed | 5 Nm at 50 rpm ±10 % | i = 98 |
| 3 Nm at 75 rpm ±10 % | i = 66 | |
| Operating mode |
intermittent duty S3: 25% DC, 10 min. |
EN 60034-1 |
| Weight | ~0.8 kg |
Electrical data
| Feature | Technical data | Additional information |
|---|---|---|
| Operating voltage | 24 V DC ±10 % |
reverse polarity protected, output stage |
| 24 V DC ±10 % |
reverse polarity protected, control |
|
| Current consumption | 2.2 A ±10 % |
at nominal torque/speed (output stage) |
| <150 mA |
starting current >150 mA (control) |
|
| Power input | ≤58 W | output stage |
| ≤3.6 W | control | |
| Battery |
CR2477N, 3 V lithium, 950 mAh |
|
| Battery service life | ~5 year(s) |
depending on ambient conditions |
| Parameter storage | 106 cycles | also applies to calibration operations |
| Digital inputs | 17 … 30 V DC |
typically 10 mA |
| Status display | 8 LEDs | |
| Keys |
2 internal keys, internal DIP switch |
|
| Switching outputs | 24 V DC ±10 % | ≤40 mA |
| Bus connection |
EIP-EtherNet/IP |
|
| EPN-PROFINET | ||
| ECT-EtherCAT | ||
| EPL-POWERLINK | ||
| Type of connection |
2x M12 plug connectors (A-coded) |
4-pole, 1x pin; 8-pole, 1x pin |
|
2x M12 plug connectors (D-coded) |
4-pole, 2x socket |
|
|
grounding via flat connector 6.3 mm |
System data
| Feature | Technical data | Additional information |
|---|---|---|
| Resolution | 720 steps/revolution
shaft |
|
| Repeat accuracy | ±1 steps/revolution | |
| Travel range | ±1300 revolution(s) | i = 98 |
| ±1980 revolution(s) | i = 66 |
Ambient conditions
| Feature | Technical data | Additional information |
|---|---|---|
| Ambient temperature | 0 … 45 °C | |
| Storage temperature | -20 … 60 °C | |
| Relative humidity | condensation inadmissible | |
| EMC |
EN 61800-3, second environment |
interference resistance / immission |
|
EN 61800-3, C2 |
emitted interference / emission |
|
| Protection category | IP54, IP65 |
EN 60529, only with mating connector |
| Shock resistance | 500 m/s2, 11 ms | EN 60068-2-27 |
| Vibration resistance | ≤100 m/s2, 5 … 150 Hz | EN 60068-2-6 |
Ordering table
| Feature | Order data | Specifications | Additional information |
|---|---|---|---|
| Gear ratio |
A66 |
i = 66 | |
|
98 |
i = 98 | ||
| Protection category |
BIP54 |
IP54 | |
|
IP65 |
IP65 | ||
| Shaft design/diameter |
CKR/14 |
clamping ring, ø14 mm | |
|
N/10 |
keyway, ø10 mm | ||
| Torque pin |
DA |
bolt, ø6 mm | |
|
B |
bolt, ø10 mm | Aluminum | |
| Interface/protocol |
EECT |
EtherCAT | |
|
EIP |
EtherNet/IP | ||
|
EPL |
POWERLINK | ||
|
EPN |
PROFINET | ||
Ordering key
AG25 Fieldbus/IE-A-50W-B-C-D-ABM-E-SW