Siko Actuator AG24 Fieldbus/IE
Product Information
With a maximum nominal torque of 14 Nm, the new AG24 is a real power pack for format adjustment
- Stainless steel hollow shaft up to max. ø20 mm, feather key groove at ø14 mm
- "manual" traveling without control unit by means of operator keys
- Brushless 160 W, 24 V DC motor with long service life
- Integrated absolute position encoder on the output shaft
- Integrated positioning controller
- Integrated spring-operated brake (option)
- 2-line LCD for target and position value and operating keys
- Integrated Industrial-Ethernet-Fieldbus
- M12 component mounting technology
- Manual emergency adjustment with motor without brake
- Industry 4.0 ready
Mechanical data
| Feature | Technical data | Additional information |
|---|---|---|
| Shaft | stainless steel | |
| Housing |
aluminum anodized |
|
| Clamping ring | stainles steel | |
| Nominal torque/rated speed | 6 Nm at 150 rpm (±10 %) | i = 30.6 |
| 10 Nm at 90 rpm (±10 %) | i = 50 | |
| 14 Nm at 64 rpm (±10 %) | i = 70.8 | |
| Operating mode |
S3 intermittent duty: 25 % DC, 10 min. |
EN 60034-1 |
| Brake momentum |
brake-induced stop momentum corresponds at least to the nominal torques of the individual transmissions. |
at ambient temperature = 20 °C |
| Weight | ~3.2 kg |
Electrical data
| Feature | Technical data | Additional information |
|---|---|---|
| Operating voltage | 24 V DC ±10 % |
reverse polarity protected, output stage + control unit |
| Power input | ~160 W | |
| Parameter storage | 106 cycles | also applies to calibration operations |
| Rated current | 6 A ±5 % | at rated torque/speed (output stage) |
| No-load current | 350 mA ±20 % |
(with transmission) |
| Display/display range | 6-digit LCD 14-segment, ~8 mm height | decimal points, 2 lines, special characters (LED backlit red/white) |
| Status display | 6 LEDs | |
| Keys | configuring, inching operation, setting of the IP address | |
| Bus connection | EIP-EtherNet/IP | |
| EPN-PROFINET | ||
| ECT-EtherCAT | ||
| EPL-POWERLINK | ||
| Type of connection | 1x M12 plug connector (A-coded) | 8-pole, 1x pin |
| 1x M12 plug connector (T-coded) | 4-pole, 1x pin | |
|
2x M12 plug connectors (D-coded) |
4-pole, 2x socket |
|
|
grounding via flat connector 6.3 mm |
System data
| Feature | Technical data | Additional information |
|---|---|---|
| Resolution | 1024 steps/revolution shaft | singleturn / 10 bit |
| Travel range | 4096 revolution(s) |
12 bit multiturn |
| Approval | UL | UL 508, UL 2011, C22.2 No. 14-18, File Nr. E502992 |
Ambient conditions
| Feature | Technical data | Additional information |
|---|---|---|
| Ambient temperature | 0 … 45 °C | |
| Storage temperature | -20 … 80 °C | |
| Relative humidity | condensation inadmissible | |
| EMC |
EN 61800-3, second environment |
interference resistance / immission |
| EN 61800-3, C2 |
emitted interference / emission |
|
| Protection category | IP54, IP65 |
EN 60529, mating connectors mounted |
| Shock resistance | 500 m/s2, 11 ms | EN 60068-2-27, half-sine, 3 axes (+/-), each 3 shocks |
| Vibration resistance | ≤100 m/s2, 10 … 55 Hz | EN 60068-2-6, 3 axes, each 10 cycles |
| Feature | Order data | Specifications | Additional information |
|---|---|---|---|
| Gear ratio |
A70.8 |
i = 70.8 | |
|
50 |
i = 50 | ||
|
30.6 |
i = 30.6 | ||
| others on request | |||
| Motor/brake |
B160W/MB |
160 W EC motor with brake | |
|
160W/OB |
160 W EC motor without brake | ||
| Protection category |
CIP54 |
IP54 | |
|
IP65 |
IP65 | ||
| Shaft design/diameter |
DKR/20 |
Clamping ring, ø20 mm | |
|
KRN/14 |
Clamping ring and feather key groove, ø14 mm | ||
| others on request | |||
| Interface/protocol |
EEIP |
EtherNet/IP | |
|
EPN |
PROFINET | ||
|
ECT |
EtherCAT | ||
|
EPL |
POWERLINK | ||
Ordering key
AG24 Fieldbus/IE-A-B-C-D-E-S