Scale 86.8mm, reinforced plastic housing either dust-tight, oil filled or waterproof, scale and pointer, with additional digital counter
Geared Potentiometers - light duty ratios 0.25 to 550:1
Potentiometer output with three CAM switches, solid shaft
Freely programmable and purely battery-operated position indicator. Offers highest flexibility since the same basic device can be configured application-specifically regarding spindle pitch, display accuracy and reading position.
Accessories for DE04, DE10, DKE01
Compact geared potentiometers - IP52
4-20 mA output
Geared Potentiometers - heavy duty ratios 0.25 to 550:1
-Resolution max. 5000 pulses/revolution
-IP65 or IP66/IP67 type of protection
-Robust bearing construction
- -40 °C … +85 °C operating temperature
- High shock and vibration resistance
The IG07 is a robust incremental encoder with through hollow shaft, which is nearly indestructible even under the harshest ambient conditions.
Shaft Encoders: Heavy Duty Aluminum
Hollow Shaft Encoder, dual channel and zero ref.
Shaft Encoders: Accessory
M4 Mounting Flange
nduction flow meters of the FLONET FH10XX.1 type series are intended for professional application and measurement of flow rates of electrically-conductive liquids in water and heat-supply systems, food-processing and chemical industries. They meet the most demanding requirements on high measurement accuracy, long-term stability and hygienic standard.
The converter provides for sensor energizing and processing of the sensor signals, and also offers functions of liquid batching control, detection of empty piping, internal meter status diagnostics, automatic counter cleaning and selection of flow units in data visualization. The flow meters have frequency, pulse and current outputs, as well as interfaces to the HART communication protocol.
Induction flow meters of the type series FLONET FS10XX are intended for professional flow-rate measurements of electrically conductive fluids including abrasive particles. The meters meet most demanding requirements regarding measurement accuracy and long-term parameter stability. Flow-rate measurements in both directions are possible. The flow sensors have excellent wear resistance and its effect on the fluid flow characteristic or pressure in the connecting piping is negligible. The associated electronic unit supplies power to the sensors unit and processes the flow-rate signals. The meters have current and frequency outputs. Communication with external devices is via the Hart communication protocol. The meter display information is in English
The Kobold flowmeter model UTS works on the basis of the suspended float principle. It comes with a M 18 x 1.5 connection. The inflow of the medium is via 4 mm hole within this connection, whereas the outflow happens via six holes which are concentrically positioned around the inlet hole. This special connection is specifically made for UTS and provided with a special seal.
This flowmeter can be optionally supplied with a special adapter G ¼ or ¼" NPT for horizontal installation. The use of this adapter is always recommended because of its special design. Especially in tight places, where conventional devices do not fit best because of their size, the UTS is an automatic choice.
The device is suitable for monitoring gas burners (e. g. oxygen, hydrogen, methane, inert gases e.g. MIG welding) due to its low price and possibility of an easy measuring tube exchange. The armature is made of nickel plated brass or stainless steel with impact resistant polystyrene protection bulb.
The KOBOLD flow meter models DPL are used to measure and monitor liquids.
It's compact design allows it to be used in equipment where space is at a premium.
The large number of pulse evaluation options offered means that the system is suited for a wide range of applications.
KOBOLD rotating vane flow meters series DRG are used for measuring and monitoring low viscous liquid.
Series DRG flow meters are working according the well-known rotating vane principle.
A series connnected electronics unti converts the signal to an analogue output, limit contacts or display.
The KOBOLD flow meter model DRB is used for measuring and monitoring liquids.
The device works according the well-known b lade wheel principle.
The blade wheel is set in motion by the following medium.
An electricity conductive medium induce a voltage while flowing through an arranged magnetic field in accordance to the Faradays induction law.
The PIT sensor is available with integral or remote mount transmitter.
The KOBOLD DMH flow meter is used to measure and monitor the volume flow rate of fluids, pulps, pastes and other electrically conductive materials, without loss of pressure.
When an electrically conductive passes through a directional magnetic field, a voltage is induced in accordance with Faradays law of induction.
The KOBOLD Vortex flowmeter DVH utilizes three primary sensing elements: a vortex shedding velocity sensor, a RTD temperature sensor and a solid state pessure transducer to measure the mass flow of gases, liquids and steam.
Because the DVH multivariable flow meter measures all of theses parameters in a single location, it delivers a more accurate process measurement.
The KOBOLD flowmeter DOG is used for flow measurement of gases
The medium flows through and orifice in a tube
Bypass bored are located at the sides