Shaft Encoders: Accessory
M4 Mounting Flange
Shaft Encoders: Accessory
-Resolution max. 5000 pulses/revolution
-IP65 or IP66/IP67 type of protection
-Robust bearing construction
- -40 °C … +85 °C operating temperature
- High shock and vibration resistance
The KSR is a sealed, single column, compression load cell. This product is suitable for high capacity platform scales and level control or process weighing in general. A reliable sealing and mechanical protection of the strain gage area is ensured by the use of stainless steel diaphragms and a housing which are cemented to the measuring element.
The KOBOLD flow meter KFR operates on the proven suspended float system, that is, the installation position is vertical and rthe flow is from bottom to top.
The instrument is constructed as a single unit, that is, it has an acrylic housing with removable, connections made of PVC brass or stainless steel.
The fliow meter is thus very reasonable priced.
The KOBOLD plastic flow meters of model KSM are based on the float principle with the float moving freely without friction in the measuring tube.
The indication point is at the greatest diameter of the float.
The floats are supplied with integrated magnets for operation with a bistable reed contact.
The KOBOLD flow meter and switches model VKG have a spring-loaded float
The contact is embedded within a height-adjustable plastic housing to prevent damage to the contacts by mechanical action or aggressive atmospheres.
The KOBOLD URK model flowmeter/monitor works on the basis of the suspended float principle. It is sued for measuring the flow rate in closed line systems.
The medium fl;ows from below throigh a glass measuring cone that gets wider on top. Thhus, the float is raised and indicates the respectie flow rate on the scale provided on the measuring cone.
The Kobold flowmeter model UTS works on the basis of the suspended float principle. It comes with a M 18 x 1.5 connection. The inflow of the medium is via 4 mm hole within this connection, whereas the outflow happens via six holes which are concentrically positioned around the inlet hole. This special connection is specifically made for UTS and provided with a special seal.
This flowmeter can be optionally supplied with a special adapter G ¼ or ¼" NPT for horizontal installation. The use of this adapter is always recommended because of its special design. Especially in tight places, where conventional devices do not fit best because of their size, the UTS is an automatic choice.
The device is suitable for monitoring gas burners (e. g. oxygen, hydrogen, methane, inert gases e.g. MIG welding) due to its low price and possibility of an easy measuring tube exchange. The armature is made of nickel plated brass or stainless steel with impact resistant polystyrene protection bulb.
The KOBOLD flow meter models DPL are used to measure and monitor liquids.
It's compact design allows it to be used in equipment where space is at a premium.
The large number of pulse evaluation options offered means that the system is suited for a wide range of applications.
KOBOLD rotating vane flow meters series DRG are used for measuring and monitoring low viscous liquid.
Series DRG flow meters are working according the well-known rotating vane principle.
A series connnected electronics unti converts the signal to an analogue output, limit contacts or display.
The KOBOLD flow meter model DRB is used for measuring and monitoring liquids.
The device works according the well-known b lade wheel principle.
The blade wheel is set in motion by the following medium.
An electricity conductive medium induce a voltage while flowing through an arranged magnetic field in accordance to the Faradays induction law.
The PIT sensor is available with integral or remote mount transmitter.
The KOBOLD DMH flow meter is used to measure and monitor the volume flow rate of fluids, pulps, pastes and other electrically conductive materials, without loss of pressure.
When an electrically conductive passes through a directional magnetic field, a voltage is induced in accordance with Faradays law of induction.
The KOBOLD Vortex flowmeter DVH utilizes three primary sensing elements: a vortex shedding velocity sensor, a RTD temperature sensor and a solid state pessure transducer to measure the mass flow of gases, liquids and steam.
Because the DVH multivariable flow meter measures all of theses parameters in a single location, it delivers a more accurate process measurement.
The KOBOLD flowmeter DOG is used for flow measurement of gases
The medium flows through and orifice in a tube
Bypass bored are located at the sides
The Kobold Mass Flow Meter type TME utilizes the Coriolis principle of operation to measure mass flow. Density and temperature are simultaneously monitored and volumetric flow is additionally calculated with these parameters. The TME Series is available with a direct mounted transmitter or in a remote mounted configuration. The TME Series can be used to meter nearly all liquid or gaseous media and was especially designed to operate in many standard applications.
It is applied in many different industrial branches. The TME Series is also used for precise dosing as well as in loading and unloading applications. Approvals for service in custody transfer (fiscal metering) applications are also available. The TME is easy to install due to a rugged housing (cast iron). A superior efficient heating is optionally available.
The Kobold Mass Flow Meter model TMU utilizes the Coriolis principle of operation to measure mass flow. Density and temperature are simultaneously monitored and volumetric flow is additionally calculated with these parameters. The TMU Series is available with a direct mounted transmitter or in a remote mounted configuration.
The unit can be used to meter nearly all liquid or gaseous media and was especially designed to operate in many standard applications. It is applied in many different industrial branches. The TMU Series is also used for precise dosing as well as in loading and unloading applications. Approvals for service in custody transfer (fiscal metering) applications are also available
The new model DMW-... direct mass flow meter has been specially designed for use in gas measuring technology. An inexpensive analogue output is fitted. The model DMW is available in three versions: with or without integrated 3 ½-digit LCD display or with a 8-digit counter.
The direct stream procedure is ideally suited for measurements from 0,5 Nl/min (max.) up to 6000 Nl/min air (model: DMW-B*786). In case of small flow rates the measurements are taken with a bypass-system (DMW-A/C). In contrast with most volumetric flow meters the mass flow meter DMW-... has no moving parts, and no temperature or pressure correction is required. The meter may be installed in any position and the pressure loss is negligible.
The simple mechanical construction ensures the highest degree of reliability when used with aggressive gases, and under tough industrial service conditions.
The flowmeter of the series KMT , based on the measurement principle of thermal mass flow, is ideally suited for the measurement of flow of compressed air and gases in pipes with sizes from DN 15 to DN 700.
Measurement of for instance the usage of comprssed air nitrogen, Co2 or other non-corrosive gases.
The fluid flows from bottom to top through the meter tube of the flow meter.
The float is lifted until an annular gap between the meter ring and the cone-shaped float is produced which corresponds to the flow.
The forces acting on the float are in equilibrium.
The KOBOLD Gear Wheel Flow Meter series DZR have been designed for a flow measurement for viscous fluids.
The measuring unit consists of a pair of gear which is moved by the flow according to the principle of gear wheel motor.
The bearings are -according to the material combination-either ball bearings or gliding bearings.
The KOBOLD gear wheel flow meter model KZA for viscous liquids is a low cost flow meter.
The movement system consists of a agear set, which is propelled by the flow.
KOBOLD pressure sensors series PDD are cost effective electronic pressure switches with digital indication of actual pressure.
Two switch points, on/off-switch delay and hysteris are within the measuring range programmable.