The RLC is a low profile, high performance stainless steel ring torsion type load cell. The fully welded constuction and glass-to-metal cableentry ensure that this product can be used successfully in harsh environments found in the food, chemical and allied process industries. This product is suitable for small and medium platform scales, hoppers and process weighing. This product meets the stringent Weights and Measures requirements throughout Europe and USA
PARAMETER VALUE UNIT Standard capacities (Emax) 50, 100, 250, 500, 1000, 2500, 5000, 7500, 10000 kg Standard capacities (Emax) 50, 75, 100, 150, 200, 250, 300, 500, 750, 1k, 1.5k, 2k, 2.5k, 3k, 5k, 10k, 15k, 20k lbs Accuracy class per NTEP NTEP IIIL Non-Approved Maximum no. of verification intervals (n) 10000 mV/V Rated output—R.O. 3.3±0.3 mV/V Rated output—R.O. (trimmed option) 3.0±0.0075 mV/V Zero balance 1.0 ±%FSO Combined error 0.0200 0.05 ±%FSO Non-repeatability 0.0100 0.0200 ±%FSO Minimum dead load output return 0.0500 ±% applied load Creep error (30 minutes) - 0.0600 ±% applied load Creep error (20 minutes) 0.0030 0.0200 ±% applied load Temperature effect on min. dead load output 0.0090 0.0250 ±% FSO/5°C Temperature effect on sensitivity 0.0072 0.0250 ±% applied load/5°C Minimum dead load 0 % Emax Maximum safe overload 150 % Emax Ultimate overload 300 % Emax Maximum safe side load 100 % Emax Excitation, recommended 10 VDC or VAC RMS Excitation, maximum 15 VDC or VAC RMS Input impedance 390±15 Ω Output impedance 350±3.5 Ω Insulation resistance ≥5000 MΩ Compensated temperature range –10 to +40 °C Operating temperature range –40 to +80 °C Storage temperature range –40 to +90 °C Element material Nickel-plated alloy steel Sealing IP65
The 9363 is a multipurpose stainless steel S-type load cell which can be used in tension or compression. This product is suitable for a wide range of hybrid scales, overhead track scales, belt scales, and process weighing applications. Reliable sealing is ensured by the proprietary TRANSEAL potting compound and additional mechanical protection of the strain gage area. This product meets the stringent Weights and Measures requirements throughout Europe and the USA.
The SHBxR is a fully weld-sealed stainless steel bending beam type load cell. This product is suitable for low capacity platform scales, packaging machines, hybrid scales and process weighing. Fully welded construction and water block cable-entry ensure that this product can be used successfully in harsh environments found in the food, chemical and allied industries. This product meets the stringent Weights and Measures requirements throughout Europe.
The SSB is a stainless steel single-ended shear beam type load cell. This robust product is suitable for a wide range of platform scales, pallet scales, overhead track scales, and process weighing applications. The fully welded construction and water block cable entry ensure that this product can be used successfully in harsh environments found in the food, chemical, and allied process industries. This product meets the stringent Weights and Measur
The Model 178 extensometer is a load sensor designed for force measurement on any load-bearing structure. This extensometer provides the total solution for weighing, level control, stress and fatigue monitoring. The design also allows multiple sensors to be permanently mounted for more complex stress profiling and analysis. The Model 178 extensometer provides an ideal solution for non-intrusive level measurements for materials that are subject to uneven buildup, bridging, or sidewall collection. Also, liquids or wetted materials that are not suited for direct contact level measurement are an ideal application for the Model 178 extensometer. The design of the Model 178 makes it an excellent solution for retrofitting existing structures without compromise of the integrity of the vessel or structure.
5103 transducers are double-ended, center-loaded shear beam load cells. The 5103 is constructed of nickel-plated alloy steel. These products are suitable for tank weighing systems, low cost weighbridges, and axle weighers. A reliable sealing is ensured by the proprietary TRANSEAL potting compound and additional mechanical protection of the strain gage area. A specially designed mounting arrangement is available, providing the ideal solution for vessel / tank weighing
The 9103 is a double-ended, center-loaded shear beam type load cell constructed of stainless steel. This product is suitable for tank weighing systems, low cost weighbridges and axle weighers. A reliable sealing is ensured by the proprietary TRANSEAL potting compound and additional mechanical protection of the strain gage area. A specially designed mounting arrangement is available, providing the ideal solution for vessel/tank weighing.
The HPS is a unique fully welded all stainless steel single point (moment insensitive) load cell. This product is suitable for low capacity platform scales, multi-head packaging machines, check weighers, lossin-weight feeders, belt scales, and general process weighing applications. The unique construction ensures that this product can be used successfully in harsh environments found in the food, chemical, and allied industries. This product meets the stringent Weights and Measures requirements throughout Europe.
The ASC2 is a single column, stainless steel compression load cell fully compatible with original Model ASC. This product is suitable for use in road and rail weighbridges and process weighing applications. The fully welded construction and built-in surge protection ensures that this product can be used successfully in many harsh environments. This load cell meets the stringent Weights and Measures requirements throughout Europe and the Americas
The KSR is a sealed, single column, compression load cell. This product is suitable for high capacity platform scales and level control or process weighing in general. A reliable sealing and mechanical protection of the strain gage area is ensured by the use of stainless steel diaphragms and a housing which are cemented to the measuring element.
The KOBOLD flow meter KFR operates on the proven suspended float system, that is, the installation position is vertical and rthe flow is from bottom to top.The instrument is constructed as a single unit, that is, it has an acrylic housing with removable, connections made of PVC brass or stainless steel.The fliow meter is thus very reasonable priced.
The KOBOLD plastic flow meters of model KSM are based on the float principle with the float moving freely without friction in the measuring tube.The indication point is at the greatest diameter of the float.The floats are supplied with integrated magnets for operation with a bistable reed contact.
The KOBOLD flow meter and switches model VKG have a spring-loaded floatThe contact is embedded within a height-adjustable plastic housing to prevent damage to the contacts by mechanical action or aggressive atmospheres.
The KOBOLD URK model flowmeter/monitor works on the basis of the suspended float principle. It is sued for measuring the flow rate in closed line systems.The medium fl;ows from below throigh a glass measuring cone that gets wider on top. Thhus, the float is raised and indicates the respectie flow rate on the scale provided on the measuring cone.
The Kobold flowmeter model UTS works on the basis of the suspended float principle. It comes with a M 18 x 1.5 connection. The inflow of the medium is via 4 mm hole within this connection, whereas the outflow happens via six holes which are concentrically positioned around the inlet hole. This special connection is specifically made for UTS and provided with a special seal.This flowmeter can be optionally supplied with a special adapter G ¼ or ¼" NPT for horizontal installation. The use of this adapter is always recommended because of its special design. Especially in tight places, where conventional devices do not fit best because of their size, the UTS is an automatic choice.The device is suitable for monitoring gas burners (e. g. oxygen, hydrogen, methane, inert gases e.g. MIG welding) due to its low price and possibility of an easy measuring tube exchange. The armature is made of nickel plated brass or stainless steel with impact resistant polystyrene protection bulb.
The KOBOLD flow meter models DPL are used to measure and monitor liquids.It's compact design allows it to be used in equipment where space is at a premium.The large number of pulse evaluation options offered means that the system is suited for a wide range of applications.
KOBOLD rotating vane flow meters series DRG are used for measuring and monitoring low viscous liquid.Series DRG flow meters are working according the well-known rotating vane principle.A series connnected electronics unti converts the signal to an analogue output, limit contacts or display.
The KOBOLD flow meter model DRB is used for measuring and monitoring liquids.The device works according the well-known b lade wheel principle.The blade wheel is set in motion by the following medium.
An electricity conductive medium induce a voltage while flowing through an arranged magnetic field in accordance to the Faradays induction law.The PIT sensor is available with integral or remote mount transmitter.
The KOBOLD DMH flow meter is used to measure and monitor the volume flow rate of fluids, pulps, pastes and other electrically conductive materials, without loss of pressure.When an electrically conductive passes through a directional magnetic field, a voltage is induced in accordance with Faradays law of induction.
The KOBOLD Vortex flowmeter DVH utilizes three primary sensing elements: a vortex shedding velocity sensor, a RTD temperature sensor and a solid state pessure transducer to measure the mass flow of gases, liquids and steam.Because the DVH multivariable flow meter measures all of theses parameters in a single location, it delivers a more accurate process measurement.
The KOBOLD flowmeter DOG is used for flow measurement of gasesThe medium flows through and orifice in a tubeBypass bored are located at the sides
The Kobold Mass Flow Meter type TME utilizes the Coriolis principle of operation to measure mass flow. Density and temperature are simultaneously monitored and volumetric flow is additionally calculated with these parameters. The TME Series is available with a direct mounted transmitter or in a remote mounted configuration. The TME Series can be used to meter nearly all liquid or gaseous media and was especially designed to operate in many standard applications.It is applied in many different industrial branches. The TME Series is also used for precise dosing as well as in loading and unloading applications. Approvals for service in custody transfer (fiscal metering) applications are also available. The TME is easy to install due to a rugged housing (cast iron). A superior efficient heating is optionally available.