{{image.AltTag}} {{image.AltTag}}
Default Image Default Image

{{details.product.ModelName}}

Sku: {{details.product.ModelNumber}}

Senix ToughSonic 3 Ultrasonic Sensor
{{details.product.PriceUnits}}
Please fill out this field...
Please enter a number...
Please enter at least 1...
Please enter at max 999999...

You purchased this item on {{details.product.OrderHistory[0].OrderDate | date : 'yyyy-MM-dd'}}

These rugged, compact ultrasonic sensors inspired the “ToughSonic” name. They are Senix flagship products with heavy-duty electronics epoxy potted into type 316 stainless steel housings, with permanently attached cables and ruggedized piezoelectric transducers. ToughSonic sensors are found on remote monitoring stations from the Australian outback to Alaskan oil fields. They are installed on heavy construction and farm equipment and in some of the harshest factory environments.  When an ordinary sensor just won’t do, you need a ToughSonic.

  • Short range — small housings
  • Short deadband at 1.75 in (44 mm)
  • Very narrow beam at close range
  • Indoor or outdoor uses
  • Straight or tapered thread options
  • Two outputs plus serial data
  • Serial data-only models
  • Temperature compensation options
  • Push-button or PC configurable

Specifications

Maximum Range 3 feet (91 cm)
Optimum Range 1.75 to 24 inches (4.5 to 61 cm)
Temperature -40° to 158° F (-40° to 70° C)
Humidity 0 to 100% operating
Protection NEMA-4X, NEMA 6P, IP68
Transducer Ruggedized piezoelectric
Compensation Temperature compensated (selectable in SenixVIEW)
Resolution Serial data: 0.0034 in. (0.086 mm)
Analog steps: 4099 (0-10 VDC),
3279 (4-20 mA)
Repeatability Nominal 0.2% of range @ constant temp. Affected by target, distance, environment
Update Rate 20 Hz (50 ms), SenixVIEW adjustable; affected by SenixVIEW filter selections

Specifications are subject to change without notice.

Outputs

Output #1 Default: 4-20 mA; SenixVIEW configurable
Alternate: Configure it as a switch output
Output #2 Default: Voltage, SenixVIEW configurable
Alternate: Configure it as a switch output
Voltage Output 0-10, 0-5 VDC or SenixVIEW configurable
10 mA maximum
4-20 mA
Current Loop
Current sourcing, SenixVIEW configurable
Maximum loop resistance 450Ω
Switch Output(s) Output #1 and/or #2 can be a switch
Each can be sinking (NPN) or sourcing (PNP)
Max ratings: 150 mA @ 40 VDC
Each has adjustable setpoint, polarity, hysteresis, window, time delays and more
RS-232 or
RS-485
Modbus & streaming protocols
9600-115200 baud (configurable)
8 data bits, 1 stop, no parity
RS-485 permits multi-sensor networks
Part number determines interface
SYNC feature Permits multiple sensors to operate in close proximity without cross-talk
Not usable concurrently with serial data

Mechanical

Housing 316 stainless steel for corrosion resistance
Usable in salt water, H2S environments
Mounting
(30 mm)
Through hole in bracket or panel
Two jam nuts included
Stainless & nylon brackets available
Adapters to 1-1/2 in and 2 in NPT available
Mounting
(1-in NPT)
Typically for tank mounting
Mates with 1-in NPT female thread
Attached Cable 6.5 feet (2 meters), PUR jacketed
Custom lengths available
Standard models: 6-wire shielded + drain
Serial data only models: 4-wire + drain, dual twisted shielded pair
Total Weight 30 mm: 10.4 oz. (0.29 kg)
1-in NPT: 14.2 oz. (0.40 kg)
Weights include 2 m cable

For more information, click here!

Manual
Data Sheet
3D Models