{{image.AltTag}} {{image.AltTag}}
Default Image Default Image

{{details.product.ModelName}}

Sku: {{details.product.ModelNumber}}

5.5-diggit ASCII Bus protocol serial bus indicator
{{details.product.PriceUnits}}
Please fill out this field...
Please enter a number...
Please enter at least 1...
Please enter at max 999999...

You purchased this item on {{details.product.OrderHistory[0].OrderDate | date : 'yyyy-MM-dd'}}

The Model 4011 (4 digit) & Model 5011 (5½ digit) LED serial input indicators are used for remote display of serial data of numeric & alpha-numeric format. These indicators are ideal for applications where multiple slave display units are required. The indicators utilise DPM's ASCIIbus protocol for easy implementation into almost any system. The indicators come with a choice of either RS-232 input or RS-485 input for bus systems. The display may be set to flash on and off whenever the indicator does not receive valid refresh data within a specified time period.

Options include programmable analogue output, one, two, three or four alarms, BCD output and other options. The analogue output option is rangeable from the front pushbuttons.

Selected options now feature ‘Plug & Play’ technology, allowing option boards to be ordered separately & field fitted when required.

  • Front panel IP65 / NEMA 4 / UL Type 4 rating,
  • Low cost - high performance design
  • Keypad lockout available at no extra charge
  • Meets European EMC directive 89/336/EEC & Low Voltage directive 73/23/EEC
  • Customizable to suit your requirements

General

Display 5½ digit (-199999 to 199999)
Display Colour : Red
Display Size : 14.2mm
Display Type : 7 Segments LED
Enviromental Humidity : < 85% non-condensing
Enviromental Operating temperature range : -10 to +50°C
Enviromental Service temperature range : -15 to +60°C
Enviromental Storage temperature range : -40 to +80°C
Front panel rating IP 65 / NEMA 4 / UL Type 4 with supplied o-ring seal
Mounting Panel Mounted
Physical Cut out Size : 48mm x 96mm
Physical Size : 48mm x 96mm x 147mm
Physical Weight : approx. 385g (no options fitted)
Power Supply 12Vdc or 24Vdc non-isolated on request, 5VA typical
Power Supply Optional : 12Vdc isolated switch mode power supply option (Option 3008-12), 5VA typical
Power Supply Optional : 24Vdcsolated switch mode power supply option (Option 3008-24), 5VA typical
Power Supply Optional : 8 - 30Vdc isolated switch mode power supply option (Option 3008), 5VA typical 95V-265Vac/dc switch mode power supply option (Option 3010), 5VA typical
Power Supply Optional : 95V-265Vac/dc switch mode power supply option (Option 3010), 5VA typical
Power Supply Standard : 115 / 230 VAC ± 10% (standard), link selectable, 50/60Hz, 5VA typical
Protection UL94V-0 : Flame retardant ABS plastic housing
Regulatory compliance Complies with EC Directives 89/336/EEC & 73/23/EEC
Regulatory compliance Complies with EC Directives 89/336/EEC & 73/23/EEC

Set Point Options

Electro-mechanical relay: Form type: Form C (change-over contact)
Electro-mechanical relay: Rating: 250Vac, 30Vdc, 2A, power factor 1
Solid-state relay Form type Form A (normally open contact)
Solid-state relay Rating: 400Vac/dc, 0.5A, power factor 1

Serial Interface Options

Address range 00 to 99
Baud rates 2400, 4800, 9600 or 19200
Line settings 1 start bit, 7 data bits, 1 parity bit, odd parity, 1 stop bit
Serial interface RS-232 standard, RS-485 optional

Operation

Maximum conversion rate 14 per second
Memory retention Full non-volatile operation
Power-up / self test time 1 - 3 seconds
Setup and calibration Full digital with visual prompting in plain messages
Warm up time None required

Analogue Outout Options

Analog output accuracy 0.1% of full scale, 12-bits
Analog output isolation Optional, 1500V input/output isolation (order option 3006)
Analog output temp. coefficient 20 ppm / °C typically
Current analog output load 500W maximum (current is source, not sink)
Voltage analog output load 1kO minimum
  • DPM3003 - 0 - 20mA / 4 - 20 mA analogue output
  • DPM3006 - Isolated outputs (order with 3002/3/13)
  • DPM3009 - Parallel BCD output (cannot be ordered with any alarm options, option 3006 or with option 3022)
  • DPM3012 - Peak / valley hold
  • DPM3025 - Keypad lockout Standard
  • Setpoint - Alarms - DPM3001P, DPM3001M, DPM3004P, DPM3004M, DPM3017P, DPM3017M, DPM3018P, DPM3018M
  • Power Supply - DPM3008, DPM3010
  • Displays - DPM3020
 
 
 
 

For more information, click here.