Senix Corporation has on offer the smart and rugged ToughSonic line of ultrasonic non-contact Distance and Level sensors, a value-add partner for the Original Equipment Manufacturers (OEM) and Custom Sensor markets.
LNM - Microwave Level Switch
KOBOLD LNM microwave level switch is used for detecting levels of fill. The microwave field penetrates several millimeters into the medium. Foam, condensate or remains of the transported medium that have stuck on to the tank are not detected.
Senix ToughSonic Ultrasonic Transmitters perform Distance and Level Measurements with “non-contact” technology, requiring a minimum working distance to the liquid. Elevating the sensor has been one solution, but now there is a better way...
IoT water level pilot project with a surprising outcome at Kololo Game Reserve.
Keller has upgraded the ARC1, Keller's IoT communications module, to the latest transmission technology with NB-IoT (narrow band) and LTE-M.
KOBOLD’s NSV level monitors to measure low-density (powdery), fine-grained bulk solids, such as plastic granules, cement, and food like flour, sugar and animal feed.
Instrotech has the Senix ToughSonic CHEM range of ultrasonic sensors, in service around the world in some of the most demanding and corrosive industrial environments. They measure a wide variety of materials including diesel fuel levels in rail locomotives and levels of liquid chemicals in the paper and food processing industries. Senix ToughSonic CHEM sensors are also used in object detection and other non-liquid level applications where corrosive gasses are present.
KOBOLD has on offer an ultrasonic level meter, The Kobold-NUS-4, to be used for non-contact, continuous level and volume measurement in vessels or for flow measurement in open channels.
KOBOLD has on offer their Kobold NSV level monitors to measure low-density (powdery), fine-grained bulk solids, such as plastic granules, cement, and food like flour, sugar and animal feed. The Kobold NSV level monitors work by the vibrating fork principle. The fork, specifically designed for use in bulk solids, continuously vibrates, and when it is covered by a medium, the vibration behaviour changes. When the Kobold NSV level monitors detects this change, it is displayed on a red LED. An additional relay output is provided for signal transmission.
ELIS has on offer a battery-powered ultrasonic water meter intended for measuring flow rate instantaneously and pressure and consumption in water piping (standard EN 14154 for water works), water distribution systems and other industrial applications.